COOL DI Water and Cooling Systems Vena® PEM COOL is specially designed to fulfill the main requirements to use in the DI water and cooling systems of PEM (polymer electrolyte membrane) Fuel Cells. Specially designed for the passage of deionized water or coolants. The use of improve peroxide cured silicone ensure the ultra-low content of leachable substances and component inertness in PEMFC ambient.

VENA®PEM COOL PROPERTIES Good mechanical properties. Low conductivity. Excellent purity – extremely low extractables and volatile compounds content. Specific postcuring process and cleaning protocol is applied to reduce the amount of environmental and production contaminants. Pharma-grade treatment. Imparts almost no conductivity to contact fluids. Excellent resistance to thermal aging and oxidizing agents (oxygen, ozone, UV). Hoses are capped so that they can be delivered with the lower possible level of contaminants. Operational temperature range from -60°C (-75 F) to +180°C (356 F), it may...

VENA®PEM COOL This reference is in accordance with the RoHS Directive 2002/95/EC and its subsequent amendments including the RoHS2 Directive 2011/65/EU and RoHS3 Directive 2015/863. Meets or exceeds operating requirements of SAE J20 R1 and VENA PEM COOL WIRED could exceed SAE J20 R2. This construction can be certified by TAP00002FX (DNV-CP-0183) "Flexible hoses for Fuel Cells in Maritime Industry" under request. It can be certified to use it in Coolant and DI Water circuits.

VENA®PEM COOL PROPERTIES Silicone properties The inner peroxide silicone rubber compound is an organopolysiloxane mixture. The typical properties of this silicone are listed below: Specific gravity Tensile strength Tear Strength Fabric properties The typical properties of the polyester mesh fabric are: Property Break strength (length) Break strength (width) Break elongation (length) Break elongation (width) LIMITATIONS Respect the work pressure established values. High temperatures may affect the bursting and working pressure values. This type of tube is not recommended for applications with...

VENA®PEM COOL