Technical Datasheet Vena® HTD Vena® HT Applications These kind of flexible hoses are specially recommended in gas conductions at high temperatures (for example. in brake cooling systems), engine exhaust fume extraction from a point immediately close to the ejection area. Also recommended for use as electric cable protection crossing hot spots or sheathed pipes where air or hot water circulation Respect the work pressure established values. Regulations The fiberglass covered with silicone used is in accordance with EU Directive 2002/95/ECC for Restriction of the use of hazardous substances (RoHS). Excellent flexibility during the assembly process. High heat resistance, especially at high temperature gases. There is the possibility to manufacture the cuffs end in inner and outer smooth appearance, a good alternative to get and easier hose installation. Excellent resistance to thermal aging and oxidizing agents (oxygen, ozone, UV). Operational temperature range from -55°C (-67 F) to +260°C (500 F), it may reach up to 300°C (572 F) during short periods of time. The standard manufacturing length is 4 meters long (13.12 ft.), although it can be manufactured in 6m long (19.69 ft) in some diameters. Construction - The reference HTD is manufactured with two plies of fiberglass covered with high temperature resistance red silicone and coated with steel wire sandwiched between the two fiberglass layers. - The reference HT is manufactured with one ply of fiberglass covered with high temperature resistance red silicone with steel wire reinforcement visible inside the tube. Technical Specifications The HTD Reference: Inner Diameter Wall thickness Bursting Pressure Vacuum Resistance Contact your sales office for more information [email protected] –

Technical Datasheet Vena® HTD Vena® HT Inner Diameter Wall thickness Working Pressure Bursting Pressure Vacuum Resistance Bending radius Contact your sales office for more information [email protected] – www.venair.c

Technical Datasheet Vena® HTD Vena® HT Inner Diameter Wall thickness +0.0157 -0.0079 inch Working Pressure Bursting Pressure Vacuum Resistance Bending radius The HT Reference: Inner Diameter Wall thickness Working Pressure Bursting Pressure Bending radius Contact your sales office for more information [email protected] – www.venai

Technical Datasheet Vena® HTD Vena® HT Inner Diameter Wall thickness Working Pressure Bursting Pressure Bending radius Contact your sales office for more information [email protected] – www.venair.c

Technical Datasheet Vena® HTD Vena® HT Inner Diameter Wall thickness Working Pressure Bursting Pressure Bending radius Contact your sales office for more information [email protected] – www.venair.c