Catalog excerpts

FMT1 - 1

Centralized washing system FMT1 Centralized washing system FMT1 The FMT1 single washing system is a one pump unit with pressure adjustable from 20 to 200 bars and a flow rate of 15, 21,30,42 litres/min. It is designed for use directly in factory production departments . It is wall mounted on special stainless steel brackets incorporating vibration dampers. Optional accessories such as hose reel, foam dispensing station and lance holder can all be mounted on the same support. The low maintenance structure is fitted with a hydraulic control device with automatic start-delayed stop function controlled simply by opening and closing the lance This reduces wear and saves energy when the lance is not in use. The pump is designed for use with hot water even at temperatures of more than 75°C and shuts down in the absence of water. Maintenance is extremely easy, with simple quick access to the various assemblies.

Open the catalog to page 1
FMT1 - 2

AVAILABLE CONFIGURATIONS TECHNICAL DETAILS • Low Voltage controls (24 volt) • Total stop • Electronic card for hydraulic control of h.p. water leak • Total block if unused for an hour ( with the possibility to exclude the block) • Over temperature safety control 80° C • Pressure adjustement • Pressure indicator • Pressure controls • Pump with ceramic piston an s/s valves • IP65 control panel • Water lack controls • S/s frame with cilindrical foot

Open the catalog to page 2
FMT1 - 3

Standard Accessories S/s Washing lance cm 90 without nozzle complete of pin Ø14 Code 11198 Hose H.P. R/2 15mt. Non-staining 3/8” female zinc-plated fittings Code 18215 Gun with coupling Ø 14 Code 25095/ST Hose R/1 in-let D/90 700 mm Code 18300/D9/700 Pair of S/s bracket for wall fixing + Antivibrating Code 20010 + Code 17503/X Optional accessories Kit S/s tank 30 Lt complete of water level sensor Code 2003

Open the catalog to page 3

All Vema catalogs and technical brochures

  1. Modula Plus

    4 Pages


    3 Pages

  3. Hydra 130/12

    3 Pages