EA15
1 / 2 PagesView full catalog
EA15
Product catalog summary
Company Overview: Veneta Elettro Meccanica srl, located in Schio, Italy, specializes in electric motor technologies and is certified by DNV for its quality management system.
Product Specifications - Cutting Units EA 15:
- Disc Execution: Available in right or left configurations.
- Cutting Capacity: Allows cuts up to 150 mm.
- Components: Supplied with a flange, counterflange (Ø 165 mm), and locknut.
- Gear Ratio: Options of 1:1 or 1:1.5.
- Disc Dimensions: Maximum diameter of Ø 350 mm.
- Shaft Options: Standard Ø 30 mm, with Ø 40 mm available upon request.
- Lubrication: Use Mobil Gear 630 oil or equivalent.
- Customization: Varnishing available upon request.
- Note: Features and dimensions are subject to change.
Electrical Data:
- Service: S6, IP 55 rated.
- Models and Specifications:
- EA 15 2A: 4.8 Cv, 3.5 kW, 2 poles, 8 Amp, 2820 RPM, 50 Kg.
- EA 15 2B: 7.2 Cv, 5.3 kW, 2 poles, 11.7 Amp, 2840 RPM, 53 Kg.
- EA 15 2C: 9.4 Cv, 6.9 kW, 2 poles, 15 Amp, 2830 RPM, 57 Kg.
- EA 15 4D: 4.8 Cv, 3.5 kW, 4 poles, 8.8 Amp, 1420 RPM, 53 Kg.
- EA 15 4C: 6.6 Cv, 4.8 kW, 4 poles, 10.5 Amp, 1390 RPM, 57 Kg.
- EA 15 42B: 4.4/5.5 Cv, 3.2/4.4 kW, 4/2 poles, 8.1/8.9 Amp, 1410/2800 RPM, 53 Kg.
- EA 15 42C: 6.1/7.5 Cv, 4.5/5.5 kW, 4/2 poles, 10.4/12 Amp, 1410/2830 RPM, 57 Kg.
Overall Dimensions: The document provides specific dimensions for different types (A, B, C) of the EA 15 model, indicating variations in size and weight.
See more
All VEM catalogs and technical brochures
RAP 40 PLUS1 Page
EA 2002 Pages
Spindle unit ECR 132 Pages
EB1 Page
EP111 Page
ECR112 Pages
ECR162 Pages
ECR 242 Pages
RAP 40 BA2 Pages
ECR 13 MAS BT 30/402 Pages
ECR 20 MAS BT 402 Pages
Archived catalogs
Related Searches
- Alternating current motor
- Asynchronous motor
- Three-phase motor
- Compact electromotor
- Induction motor
- Motor spindle
- Motorized motor spindle
- Angle gear drives
- Milling head
- Liquid-cooled motor spindle
- 90° angle head
- Cutting motor spindle
- Wood motor spindle
- 2-axis milling head
- Pull stud
- Aluminum motor spindle
- Angle milling head
- Turning motor spindle
- Cutting angle head
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.