Low voltage asynchronous motors Marine motors

Contents Contents Introduction 4 Technical explanations 7 Motors for operation on ships Dimensions 19 Spare parts The products featured in this catalogue can also be found in the interactive electronic catalogue V 6.0. Additional information about the company and the products of the VEM Group are available via internet: www.vem-group.com. The electronic catalogue can assist you in selecting and configuring VEM products. You can choose to print out data sheets and requests and the programme can display scaled and dimensioned drawings that can be downloaded in different 2D and 3D-data files. In...

Introduction Innovative drives made in Germany Electric machines made by VEM have millions of applications around the globe. VEM stands for high-quality products such as large and special-purpose machines, standard motors and customized drives which have given reliable service in a variety of industries. Systems of all types use our motors, generators and drives for a wide range of voltages. They have stood the test for decades even under extreme conditions – whether in the dust and heat of mill trains, chemical plants with explosion hazards, or in the moist, salty air aboard ships. Our quality...

Introduction • optional arrangement of connection box left/top/right • environmentally acceptable with low-noise ventilation system • availability to East European standards • alternative availability of conventional IEC/DIN series and an advanced line of products based on IEC 60072 for mounting dimensions and sizes • facilities for mounting components such as pulse generators, tachometers, brakes, speed monitors and external ventilation units to deal with today’s (automatic) control tasks as required by customers. Working with customers worldwide Wherever clients require electric machines, we...

LV Asynchronous motors | Marine motors | Special catalogue 01-2009 Introduction 6

Technical explanations Application Motors in sea-water design have to be equipped at a high technical level, because they are subject to special environmental and operational conditions. The requirements for reliability are high and they are also subject to special regulations. Motors in sea-water design are used as drives for ancillary units on board of ships and they comply with the special climatic and mechanic loads of these application ranges. To ensure a high-quality engineering and technological design for new developments, reconstructions and repairs of ships the working procedures at...

Technical explanations Technical data The performance characteristics can be taken from the lists for motor selection data. For more important hints for selection of three-phase asynchronous motors please refer to the VEM main catalogue “Low voltage asynchronous motors, IEC motors with squirrel-cage rotor”. If the operation on board of ship is only permitted under observance of additional regulations like gas or dust explosion protection, please use the corresponding motor series. Dimensions and types of construction The mounting and assembly dimensions comply with the values for the basic design...

Technical explanations Motors in sea-water protection acc. to “Germanischer Lloyd” http://www.gl-group.com Ambient temperature 45 °C Thermal class 155 [F] Limit temperature of the winding 100 K Bearing temperature for anti-friction bearing with special grease 75K Individual approval for essential drives ≥ 50 kW for essential services Production survey for essential drives – Name plate marking German/English ambient temperature 45 °C or other separately agreed ambient temperature designation “SS nach GL” VEM motors GmbH Wernigerode has the right to conduct self dependent tests according to the...

Technical explanations Motors in sea-water protection acc. to “China Classification Society” http://www.ccs.org.cn Ambient temperature 45 °C Thermal class 155 [F] Limit temperature of the winding 105 K for motors ≥ 600 W and for motors with self-ventilation (IC410) 100 K for motors above 600 W Shaft steel for motors for propulsion and drives has to be approved by CCS (if the shaft is part of the main drive) Individual approval for essential drives > 50 kW for essential services Production survey for essential drives – Name plate marking English/French ambient temperature 45 °C or other separately...

Technical explanations Fits: Shaft ends Shaft ends up to Ø 48 as of Ø 55 Mating components k6 m6 H7 Tolerances – Electrical parameters The following tolerances are permitted as specified in DIN EN 60034-1: Efficiency (when determined indirectly) Power factor Slip (at standard load in warmed-up state) Starting current (in the planned starting connection) Starting torque Pull-up torque Pull-out torque Moment of inertia Noise level (Measurement area – sound intensity level) Taking necessary manufacturing tolerances and deviations in materials in the case of the raw materials used into account, these...

Motors for operation on ships General technical data Product line Rated output Sizes Material of housing Rated torque Types of circuit Insulation of stator winding Type of protection Type of cooling Coolant temperature/ altitude of site Rated voltage Types of construction Colour system Vibration grade Shaft end Sound pressure level Limit speeds Bearing design Motor weights Terminal box Documentation Tolerances Options Motor with squirrel-cage rotor, IEC/DIN 0.09 kW to 450 kW (50 Hz) or 490 kW (60 Hz) 56 to 355 Grey cast iron 0.60 Nm to 3,040 Nm Motors with one speed are designed with Δ/Y-circuit...

Dimensions Notes to dimensions Dimensional designations according to EN 50 347 and IEC 60 072 Flange sizes in the dimensional tables are given in accordance to DIN 42948. All dimensional data in mm VEM motors GmbH reserves the right to change technical data without preceding information. Dimensional data in catalogues can lose their validity. Binding dimensional data can be requested from the VEM sales organisations. Flange dimensions Flanges with threadholes Flange type acc. to EN 50 347 Flange type acc. to DIN 42948 LA c1 M e1 N b1 P a1 S s1 T f1 FT 65 FT 75 FT 85 FT 100 FT 115 FT 130 FT 165...