Catalogs >
VELMEX, Inc. >
motor driven linear stages for scanning and indexing

motor driven linear stages for scanning and indexing
16Pages

Catalog excerpts

motor driven linear stages for scanning and indexing - 4

Support Bearing delivers just the rightcombination of constraint and anti-vibration qualities for the lead screw Large, Versatile Carriage ֖ provides a4.6 x 3.1Ԕ mounting surface suitable for carrying anything from an assembly fixture to a measuring probe eight threaded attachment holes let you securely fasten any kind of payload. Also, there֒s four accessory holes for limit switch cam or other sensors. Carriage has fit and wear compensation adjustments End Plate provides aconvenient way to directly mount a StabilNut֙ a Velmex exclusive, is the ֓solid, low friction connection between the...

Open the catalog to page 4

motor driven linear stages for scanning and indexing - 5

Coefficient of friction: 0.09 typical > Coefficient range: 0.04 (Heavy Load Dynamic ) to 0.15-0.3 (Lubricated Heavy Load Static>1 hour) Minimum motor torque required: 55 oz-in (0.4 N-M) Repeatability: 0.0002 over short term, long term dependent on wear Straight line accuracy: 0.003Ԕ over entire travel distance Screw lead accuracy: 0.003/10Ԕ (0.076 mm/25 cm) 0.0015/10Ԕ available. Consult factory. Operating temperature: 0 to180˚ F (-18 to 82˚ C) FinishLead screw: hard nickel plated Carriage: machined aluminum Other surfaces: black anodized aluminum * Maximum 40 lbs. thrust towards motor. >...

Open the catalog to page 5

motor driven linear stages for scanning and indexing - 12

Motor Drivenwww.velmex.com 1-800-642-64462.44 Motorized BiSlide > Center to center in 0.1 inchesActual Length = Center to Center + 5.0 inchesExample: Use T1-220 for Parallel Coupled with 22 inches Center to Center (Actual = 27 inches) >

Open the catalog to page 12

motor driven linear stages for scanning and indexing - 13

Motor Drivenwww.velmex.com 1-800-642-6446Motorized BiSlide 2.45 > Center to center in 0.1 inchesActual Length = Center to Center + 5.0 inchesExample: Use T2-135 for Parallel Coupled with 13.5 inches Center to Center (Actual = 18.5 inches) >

Open the catalog to page 13

motor driven linear stages for scanning and indexing - 14

Motor Drivenwww.velmex.com 1-800-642-64462.46 Motorized BiSlide PC1 Manual Parallel Coupled PC2 Motor Driven Parallel Coupled >

Open the catalog to page 14

motor driven linear stages for scanning and indexing - 15

Vertical application versatility is built in to every BiSlide. The end plate includes four mounting holes for attaching directly to the carriage of a horizontal assembly, or any other suitable mounting surface. For even more mountingflexibility, the standard BiSlide Assembly can be endmounted, or "sandwich" cleated to the T-Slot plate and I-beam Base profiles. This right angle drive option has a standard BiSlide sandwich cleated to the I-beam Base profile (vertical). The bottom (horizontal) surface is the T-Slot plate profile. BiSlide mounted directly to another BiSlide in an XYZ...

Open the catalog to page 15