VT67DDCS

VT67DDCS

VT67DDCS

Product catalog summary
Overview: The document provides detailed specifications and operational guidelines for the High Performance Vane Pump VT67DDCS series. It includes information on mounting, volumetric displacement, shaft types, modifications, and operating conditions.
Specifications:
  • Mounting Flange: SAE C 6 bolts, J744 standard.
  • Volumetric Displacement: Ranges from 10.8 cm³/rev (0.66 in³/rev) to 157.9 cm³/rev (9.64 in³/rev).
  • Shaft Types: Keyed and splined options available, including SAE C and non-SAE configurations.
  • Seal Class: Options for mineral oil (S1), fire-resistant fluids (S4), and mineral oil with fire resistance (S5).
  • Direction of Rotation: Clockwise (R) and counter-clockwise (L).
Operating Conditions:
  • Pressure Ratings: Maximum pressures range from 140 bar (2000 psi) to 275 bar (4000 psi) depending on the model.
  • RPM Limits: Maximum RPM varies by model, with some models reaching up to 2500 RPM.
  • Internal Leakage: Not recommended to operate at 275 bar and 1500 RPM if internal leakage exceeds 50% of theoretical flow.
Performance Characteristics:
  • Noise Levels: Provided for triple pump configurations under specific discharge conditions.
  • Power Loss: Total hydromechanical power loss is calculated as the sum of each section's loss at its operating conditions.
  • Permissible Loads: Maximum axial load is 1200 N (270 lbs).
Recommendations:
  • Ensure proper selection of seal class based on fluid type.
  • Adhere to specified pressure and RPM limits to avoid excessive internal leakage and ensure optimal performance.
  • Regularly monitor noise levels and power loss to maintain efficient operation.
See more

Catalog excerpts

VT67DDCS-2

HIGH PERFORMANCE VANE PUMP VT67DDCS INTERNAL LEAKAGE ( TYPICAL) NOISE LEVEL ( TYPICAL) Do not operate pump for more than 5 seconds at any speed or viscosity if internal leakage is more than 50 of theoretical flow. Total leakage is the sum of each section loss at its operating Triple pump noise level is given with each section discharging at the pressure noted on the curve. HYDROMECHANICAL POWER LOSS (TYPICAL) PERMISSIBLE RADIAL LOAD Maximum permissible axial load Fa = 1200 N (270 Lbs) Total hydromechanical power loss is the sum of each section at its operating conditions.

 Open the catalog to page 2

All Veljan Hydrair Limited catalogs and technical brochures

  1. VT7QDCC

    3  Pages

  2. VR5V06 Series

    8  Pages

  3. VR5U08 Series

    8  Pages

  4. VR4R series

    8  Pages

  5. E Series

    7  Pages

  6. V4DO1

    13  Pages

  7. V4DO2

    14  Pages

  8. V4DO6

    16  Pages

  9. VR4V

    8  Pages

  10. VT7QDCB

    3  Pages

  11. VT6CC

    2  Pages

  12. VT7DSW

    2  Pages

  13. VTXB

    3  Pages

  14. VJ

    13  Pages

  15. VCC

    6  Pages

  16. VSD

    6  Pages

  17. VIC

    7  Pages

  18. ILV 750

    7  Pages

  19. ILV 725

    7  Pages

  20. ILV 720

    9  Pages

  21. ILV 714

    9  Pages

  22. VVV01

    2  Pages

  23. VT67EDC

    3  Pages

  24. VT67DCC

    3  Pages

  25. VT67EC

    2  Pages

  26. VT67BB

    2  Pages

  27. VT6CB

    3  Pages

  28. VT6BB

    4  Pages

  29. VTXBB

    4  Pages

  30. VD4S06

    14  Pages

  31. VD4S03

    12  Pages

  32. VR5S06

    8  Pages

  33. VR4S03

    8  Pages

  34. VR4U10

    9  Pages

  35. VR5V12

    8  Pages

  36. VRIEO2

    5  Pages

  37. VT7EE/VT7EES

    2  Pages

  38. VT6EDCR

    3  Pages

  39. VT6DCCR

    3  Pages

  40. VT6CRM

    2  Pages

  41. VT6CR

    2  Pages

  42. J9V045

    15  Pages

  43. J9V009

    7  Pages

  44. VM4E

    2  Pages

  45. VM4D

    2  Pages

  46. VM4C

    2  Pages

  47. VM3B

    2  Pages

  48. System Saver

    17  Pages

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.