Accessory Valves
1Pages

Accessory Valves Hydraulic Gauges, Over Pressure Cartridges Standard Pressure Gauges      Liquid filled gauges with analog readouts. Avalible in 1,500 to 10,000 psi. Conform to ANSI standard B40.1 Grade B. SAE 4 male connection. Safety Glass Window. Model No. Pressure Range Back Mount Pressure Gauges  Liquid filled gauges with analog readouts.  Avalible in 1,500, 5,000, 6,000 and 10,000 psi.  Conform to ANSI standard B40.1 Grade B.  4 male connection. SAE  Safety Glass Window. Model No. Pressure Range To extend the life of Pressure Gauges, run your system at no more than 75% of the gauge scale. Gauge Protector 12 Characters optional custom text. Examples: 12 Characters optional -A: 3,000 PSI custom text. Examples: 72-0000-00 -Circuit B -A: 3,000 PSI For use with gauges -Sys. Pressure -Circuit B -Sys. Pressure 72-1221-39 2X 1/4 Capscrew Coolant Drain and 72-3221-55 Mounting Holes Capscrew Coolant Drain 2X 1/4 Both Sides Mounting Holes Both Sides ILS720000 REV C 2X 1/4 Capscrew Mounting Holes ILS720000 REV C 72-0000-00-C For Custom Text Call to Order Special Engraving Text required at order placement. (Limit 12 Characters) Examples: Private Labeling or Logo on top. With 12 addl custom characters Protect Your Low Pressure Devices running within a High Pressure System  Valve cartridge will open to bleed off excess pressure in the event of over-pressurization.  Screw in valve cartridge adds an extra element of assurance in systems where you must use a pressure sensitive device.  SAE 4 male connection.  Valve cartridge has a tamper proof plug.  A set point of approximately 20% higher than system pressure is recommended.  Leak-free operation before and after reseat condition.  The only valve cartridge designed to bleed off excess pressure and re-seat at approximately .75 80% of set point. © Vektek, April 2019 SAE 4 OVER PRESSURE RELIEF HOLE 12 Characters optional custom text. Examples: -A: 3,000 PSI -Circuit B -Sys. Pressure Coolant Drain 1.90 Both Sides 1.90 REV C