Specification sheet 4 … 20 mA/HART - two-wire Radar sensor for continuous level measurement of liquids Technical data Measuring range up to Process fitting Thread from G1½; 1½ NPT; flanges from DN 40, 1½" Process pressure Process temperature Ambient, storage and transport temperature Operating voltage SIL qualification Materials Application area The VEGAPULS 62 sensor can be used universally for continuous level measurement in liquids. It is suitable for level measurement in storage containers, reactors and process vessels, even under difficult process conditions. With its various antenna versions and materials, VEGAPULS 62 is the optimal solution for almost all applications and processes. Its wide temperature and pressure range makes project planning simple. Your benefit • Maintenance-free operation thanks to non-contact measuring principle • High plant availability, because wear and maintenance free • Exact measuring results independent of pressure, temperature, gas and steam Function Extremely short microwave pulses are emitted by the antenna system in the direction of the measured product, reflected by the product surface and received back again by the antenna system. The time from emission to reception of the signals is proportional to the level in the vessel. A special time stretching procedure allows reliable and precise measurement of the extremely short signal running times. The wetted parts of the instrument are made of 316L, Alloy C22 (2.4602), Alloy 400 (2.4360), stainless steel precision casting (1.4848) or PTFE, PP, PEEK. The process seal is made of FKM, FFKM or graphite. You will find a complete overview of the available materials and seals in the "Configurator" at www.vega.com and "VEGA Tools". Housing versions The housings are available as single chamber or double chamber version in plastic, stainless steel or aluminium. They are available with protection ratings up to IP 68 (1 bar). Electronics versions The instruments are available in different electronics versions. Apart from 4 … 20 mA/HART in two and four-wire version, there are also digital versions with Profibus PA, Foundation Fieldbus and Modbus protocols. Another HART version is available with integrated accumulator. Supplementary electronics For instruments with double chamber housing two supplementary electronics such as radio module or a power pack are available. Approvals The instruments are suitable for use in hazardous areas and are approved e.g. according to ATEX and IEC. The instruments also have various ship approvals such as e.g. GL, LRS or ABS. You can find detailed information at www.vega.com/downloads and "Approvals". VEGA Grieshaber KG, Am Hohenstein 113,

Specification sheet Dimensions The adjustment of the instrument is carried out via the optional display and adjustment module PLICSCOM or via a PC with the adjustment software PACTware and corresponding DTM. Further adjustment options are possible via a HART Communicator as well as manufacturer-specific programs such as AMS™ or PDM. 1 Threaded version 2 Threaded version with temperature adapter up to +250 °C 3 Flange version Information You can find further information about the VEGA product line on www. vega.com. In the download section at www.vega.com/downloads you'll find operating instructions,...