Wireless communication Overview Wireless communication

Overview Wireless communication Area of application The wireless communication devices are used when measured values have to be transferred from remote monitoring stations or mobile tanks to data collection centres. They are therefore ideal for use in connection with VEGA Inventory System, the software for automatic inventory monitoring. They also enable wireless remote diagnostics and maintenance of the connected sensors. Principle of operation Only the transmitting unit is required for wireless communication. It is connected to the sensors via a serial bus cable or via the standard 4 ... 20...

WirelessHART adapter Remote enquiry of measured values and remote parameter adjustment for one plics® sensor Receiving unit for wireless measured value transmission and remote parameter adjustment/ diagnosis (multiple channel) Emitting unit for wireless measured value transmission and remote parameter adjustment/ diagnosis (single channel) Sensor with WirelessHART adapter Radio path VEGA Inventory System, e-mail, SMS 1 x Ethernet, Modbus or HART WirelessHART protocol Wall or tube mounting Wall mounting On sensor via M20 x 1.5 cable gland Temperature range Voltage supply

PLICSMOBILE T61 External radio unit for plics® sensors Application area The PLICSMOBILE T61 is an external GSM/GPRS radio unit for transmission of measured values and for remote parameter adjustment of plics® sensors. Typical applications are measured value transmissions with mobile vessels, battery-operated level measurements and deep well measurements. The PLICSMOBILE T61 is particularly suitable for the data exchange with the web-based visualization software VEGA Inventory System. Your benefit − Universal use through world-wide use of PLICSMOBILE T61 through quadband technology − High flexibility...

WirelessHART-Gateway WirelessHART gateway for operation of WirelessHART networks Application area Gateway from WirelessHART network to control, parameterization or diagnosis systems. It supports WirelessHART networks up to a size of 250 network participants and has an RS485 as well as an Ethernet interface. HART and Modbus protocols can be transmitted via both interfaces. Your benefit − Simple connection, also of existing field devices, to WirelessHART networks − Standardized wireless communication ensures security of investment − Very simple retrofitting and can hence be used for existing field...

WirelessHART-Adapter WirelessHART adapter as retrofitting part for a 4 … 20 mA/HART sensor Application area The wirelessHART adapter enables retrofitting of a wirelessHART interface for conventional 4 … 20 mA/HART sensors. The connection to wirelessHART networks, for example in modern tank farms, is simplified by this adapter. It is mounted directly to the cable entry or at a distance to the field device. The instrument contains a power pack and powers also the field device. Hence also independent measurement loops are possible. The rotatable antenna ensures optimum reception through suitable...

WirelessHART accessory Mounting set for WirelessHART sensors Application area Mounting set for WirelessHART adapter as well as Lithium-Thionyl-Chloride battery for retrofitting. Your benefit − Also for wall or tube mounting − Suitable for all WirelessHART adapters − Components packed as a set