Catalogs >
VEGA Grieshaber KG >
Specification sheet VEGASWING 53

Specification sheet VEGASWING 53
2Pages

Catalog excerpts

Specification sheet Contactless electronic switch Vibrating level switch for liquids Technical data Sensor length (L) Process pressure Process temperature Standard Process temperature High temperature version Viscosity - dynamic Density Density - can be ordered optionally Ambient temperature on the housing Storage and transport temperature Hysteresis approx. 2 mm (0.08 in) with vertical installation Process fitting Thread from G¾, ¾ NPT, hygienic fittings Operating voltage 20 … 253 V AC, 50/60 Hz, 20 … 253 V DC Domestic current require- approximately 3 mA (via load circuit) ment Load current min. 10 mA/max. 250 mA Switching delay 500 ms (on/off) 0.5 … 60 s (can be ordered optionally) Materials Application area The VEGASWING 53 is used as a universal level switch in liquids with small dimensions. Independent of the mounting position, it detects reliably with millimetre accuracy the limit level. The position of the switching point is determined via the tube extension. The instrument can be used as empty or full detector, as approved overfill protection, dry run protection or pump protection in vessels and pipelines. The VEGASWING 53 is an economical solution with maximum reliability and safety. Your benefit • Minimum time and cost expenditure due to simple setup without medium The wetted parts of the instrument are made of stainless steel 316L. The supplied process seal is made of Klingersil C-4400. A complete overview of the available materials and seals can be found on our homepage. Housing versions The instruments are available in different temperature versions and as hygienic version. The housing is made of 316L and plastic PEI. The different versions are available up to protection IP67. Electronics versions • Precise and reliable function due to product-independent switching point The instruments are available in three different electronics versions. Apart from the electronics with transistor output (PNP) and the IO-Link output a version with contactless electronic switch is also available. The heart of the sensor is the vibration drive by which the tuning fork is energized to vibrate at its resonance frequency. When covered with medium, the frequency of the fork decreases. This frequency change is processed by the integrated electronics and converted into a switching command. With the tuning fork with only 38 mm length, the VEGASWING work reliably independent of the installation position in any liquid. Pressure, temperature, foam, viscosity and the composition of the liquid do not influence the switching accuracy. VEGA Grieshaber KG, Am Hohenstein 113, 77761 Schiltach/Germany, www.vega.com The instrument is approved as overfill protection according to WHG and has also different ship approvals such as e.g. GL, LRS or ABS. Detail

Open the catalog to page 1

Specification sheet Adjustment Instrument selection No adjustments on the instrument are necessary. The switching function is determined by the electrical connection. On our homepage under "Products" you can select the suitable measuring principle and instrument for your application. Electrical connection You can find detailed information on the instrument versions at www. vega.com and "Products". Contact You can find your personal contact person at VEGA on our homepage www.vega.com and "Contact". VEGASWING 53 with valve block according to ISO 4400 You can find details on electrical...

Open the catalog to page 2

Specification sheet VEGASWING 53 2Pages

Catalog excerpts

All VEGA Grieshaber KG catalogs and technical brochures

Specification sheet VEGASWING 53
2Pages