Specification sheet Transistor (PNP/NPN) Capacitive level switch Technical data Output signal Sensor length (L) Process fitting 251 … 1000 mm (9.88 … 39.37 in) Thread G½, G¾, G1, M24 x 1.5 Thread ½ NPT, ¾ NPT, 1 NPT Clamp 1", 1½", 2" Process pressure Process temperature Ambient temperature Operating voltage Materials The wetted parts of the instrument are made of PEEK and stainless steel 316L. The process seal is made of FKM. You will find a complete overview of the available materials and seals in the "Configurator" at www.vega.com and "Products". Housing versions The housing is made of stainless steel 316L or Valox and is available in protection classes IP66/IP67 and up to IP69. Electronics versions Application area The VEGAPOINT 23 is a capacitive level sensor for level detection of water-based liquids. Typical applications are overfill and dry run protection. Due to its tube extension, the sensor is available up to a length of 1 m (39.4 in). Your benefit • Simple setup via Bluetooth adjustment • High plant availability, because wear and maintenance free • Exact switching function independent of process condition The instruments are available in two different electronics versions. Apart from the electronics with transistor output (PNP/NPN), a transistor version with IO-Link output is also available. Approvals Hygienic approvals for use in the food and pharmaceutical industries are planned for the device. The technical data in the respective safety instructions are valid for approved instruments (e.g. with Ex approval). In some cases, these data can differ from the data listed herein. All approval documents can be downloaded from our homepage. Function An alternating electric field is generated at the tip of the measuring electrode. If the sensor is covered with medium, the capacitance of the sensor changes. This change is detected by the electronics and converted into a switching command. Any buildup is ignored to a certain degree and therefore has no influence on the measurement. VEGA Grieshaber KG, Am Hohenstein 113,

Specification sheet Adjustment Wireless adjustment via Bluetooth Wireless connection to standard adjustment devices with integrated Bluetooth LE or alternatively Bluetooth USB adapter. The Bluetooth version of the device enables wireless connection to smartphones/tablets (iOS/Android) or Windows PCs. Operation is via a free app from the "Apple App Store", the "Google Play Store" or the "Baidu Store". Alternatively, adjustment can also be carried out via PACTware/DTM and a Windows PC. VEGAPOINT 23, standard version - thread 1 Thread ½ NPT, ¾ NPT, 1 NPT with M12 x 1 plug connection 2 Thread G½,...