Point level l Vibration l Liquids Vibrating level switch for all liquids VEGASWING level switches detect the levels of liquids reliably with millimetre accuracy, regardless of their mounting position. They can be used universally to signal full or empty levels, protect against overfilling or dry running or protect pumps in containers and pipelines. They are not sensitive to turbulence, foam, vibration and buildup on the tuning fork. Vibrating level switches operate with a tuning fork that vibrates at its resonance frequency. When the level in the tank changes and the fork is either covered or uncovered, the oscillation frequency changes - this is detected and the output made accordingly.  Simple setup and commissioning without adjustment saves time and costs  Reliable point level detection, unaffected by installation position, pressure, temperature, foam and viscosity  Low operating costs, self-monitoring and maintenance-free

Liquids under high and low temperatures VEGASWING 51: Compact version VEGASWING 61: Compact version Compact version or with tube extension up to 3 m VEGASWING 53: Tube extension up to 1 m VEGASWING 63: Tube extension up to 6 m 316L, ECTFE, PFA, enamel, Alloy 400, Duplex, Alloy C22 Inconel 718 (tuning fork), 316L, Alloy C22 Process fitting Thread from G½, ½ NPT, hygienic fittings Thread from G¾, ¾ NPT, flanges from DN 25, 1", hygienic fittings Thread from G1, 1 NPT, flanges from DN 50, 2" Process temperature Process pressure Signal output Three-wire: IO-Link, transistor (PNP/NPN), contactless...

Point level l Vibration l Granulated bulk solids Vibrating level switch for granulated bulk solids VEGAVIB is a level switch for granulated and coarse-grained bulk solids. VEGAVIB reliably and accurately signals the minimum or maximum limit level. The smooth surface of the vibrating rod, without sharp corners or edges, prevents bulk solids from getting stuck or jammed and is easy to clean. When VEGAVIB is immersed in bulk solids, its vibration is damped. Its electronics converts this damped signal into a switching command which can be used, for example, to protect against overfilling or empty...

Measuring range Process fitting Process temperature Process pressure Signal output Granuled and coarse-grained bulk solids Bulk solids from 20 g/l Thread from G1, 1 NPT, flanges from DN 32, W, hygienic fittings Relay, transistor, two-wire, NAMUR output, contactless electronic switch ■/ Minimal time and cost expenditure thanks to simple setup without medium Control lamp (LED) or pluggable display module PLICSLED ATEX, UKEX, lECEx, FM, CSA, EAC (GOST), UKR Sepro, SIL2, NEPSI, INMETRO, KOSHA/KTL, CCOE

Point level l Vibration l Powders Vibrating level switch for powders VEGAWAVE reliably detects both minimum and maximum levels of powdery and fine-grained bulk solids with a grain size of up to 10 mm. The tuning fork is suitable for adhesive and abrasive products as well as bulk solids with very low density. Its design means it is unaffected by buildup. The vibration of VEGAWAVE is damped when covered by any bulk solids. Its electronics converts this signal into a switching command which can be used, for example, to protect against overfilling or empty level.  Simple setup without adjustment...

VEGAWAVE S61 VEGAWAVE 61/63 VEGAWAVE 62 Measuring range Process fitting Process temperature Process pressure Signal output Powders and fine-grained bulk solids Bulk solids from 8 g/l ■/ Minimal time and cost expenditure thanks to simple setup without medium Thread G1%, 1% NPT, flanges from DN 50, 2", hygienic fittings Relay, transistor, two-wire, NAMUR output, contactless electronic switch Control lamp (LED) or pluggable display module PLICSLED ATEX, UKEX, lECEx, FM, CSA, EAC (GOST), UKR Sepro, SIL2, NEPSI, KOSHA/KTL, CCOE