Non-contact measurement with radiation-based measuring principle Radiation-based measurement is based on focussed gamma rays, i.e. radiation, emitted by a minimally radioactive isotope. The sensor, which is mounted on the opposite side of the container, receives this radiation. Because gamma rays are attenuated when penetrating matter, the highly sensitive sensor can calculate the level, limit level, density or mass flow from the intensity of the incoming radiation recieved.  Maximum operational reliability even under the toughest operating conditions  Measurement independent of pressure, temperature and product toxicity or corrosiveness  Measuring system can be installed externally and set up during ongoing production

FIBERTRAC 31 FIBERTRAC 32 SOLITRAC 31 * Measuring range Process pressure Process temperature Non-repeatability Mounting Signal output Level and interface measurement of liquids and bulk solids Level and interface measurement of liquids and bulk solids Level and interface measurement of liquids and bulk solids Sensor with flexible plastic detector 0 42 mm Sensor with flexible plastic detector 0 60 mm Sensor with PVT rod detector From outside on the vessel 4 ... 20 mA/HART, Profibus PA, Foundation Fieldbus PLICSCOM, PACTware/DTM, VEGADIS 81, VEGADIS 82, ATEX, UKEX, lECEx, NEPSI, FM, CSA, EAC (GOST),...

Level detection of liquids and bulk solids Density measurement of liquids and bulk solids Mass flow determination of bulk solids on belts and in screw conveyors Measuring range Sensor with PVT rod detector Sensor with integrated Nal detector With PVT rod detector in protective tube of 316L Process pressure Process temperature 1 % of measuring range final value From outside on pipeline or on vessel From outside on pipeline or on vessel Through supplied measuring frame Signal output 8/16 mA/HART, Profibus PA, Foundation Fieldbus 4 … 20 mA/HART, Profibus PA, Foundation Fieldbus 4 ... 20 mA/HART,...

Source container for radioactive isotope Source container for radioactive isotope Source container for radioactive isotope Measuring range Process pressure Process temperature Mounting plate or L profile 152 mm (6") Signal output Optionally with ON/OFF position switch Optionally with ON/OFF position switch Optionally with ON/OFF position switch manual, pneumatic manual, pneumatic manual, pneumatic  Reliable shielding allows use without control areas  Ideal for mass flow determiniation with an

Source container for radioactive isotope Source container for radioactive isotope Source container for radioactive isotope Measuring range Process pressure Process temperature Signal output Optionally with ON/OFF position switch Optionally with ON/OFF position switch Optionally with ON/OFF position switch manual, pneumatic manual, pneumatic manual, pneumatic  Minimal space requirement due to compact design with low weight (11 kg)  Trustworthy shielding allows use without control areas (34 kg)