Point level l Conductive Point level detection with conductive point level switches When the electrodes of the conductive point level sensor come into contact with a conductive fluid, a small alternating current begins to flow. The electronics then triggers a switching command. Conductive point level sensors are used in all areas of industrial instrumentation, e.g. as overflow protection, pump control or dry run protection.  Simple, robust and low-cost point level detection  Installation of point level sensors possible in any position  Detection of multiple switching points within a vessel

Conductive liquids Conductive liquids Compact level switch with front-flush partly insulated electrode and one switching point Compact level switch with partly insulated rod electrodes and max. two switching points Probe length Process fitting Thread G1, cone DN 25, Varivent Process temperature Process pressure Signal output Relay, transistor output Relay, transistor output  Optimal cleanability thanks to front-flush mounting  Simple and versatile with

Point level l Conductive PRO Conductive liquids Conductive liquids Conductive liquids Probe length Partly insulated rod with one switching point Partly insulated rod with max. four switching points Partly insulated rod with max. four switching points Process fitting Process temperature Process pressure Signal output ATEX, UKEX, Overfill protection ATEX, UKEX, Overfill protection  Easy installation in confined  Simple and versatile with cut to length probes spaces through small sensor dimensions

Conductive liquids Conductive liquids Partly insulated cable with max. four switching points Partly insulated rod with one switching point  Simple and versatile with cut to length probes  Easy installation in confined