Offshore
18Pages

{{requestButtons}}

Catalog excerpts

Offshore - 1

Level and pressure instrumentation for the offshore industry Application examples and products Anwendungsbeispiele und Produkte

Open the catalog to page 1
Offshore - 2

Measurement technology for offshore applications This brochure presents examples of applied level and pressure measurement technology. Here, you’ll learn which sensors fit which measuring tasks. ■ Storage tank for liquid raw materials ■ Storage tank for solid raw materials ■ Mud tank level ■ Trip tank ■ Shaker ■ Oil separators Level measurement and point level detection Level measurement and point level detection Level measurement Level measurement Level measurement and point level detection Pressure, level and interface measurement ■ Primary desalter ■ Gas separators (scrubbers) ■ Flare...

Open the catalog to page 2
Offshore - 3

VEGABAR 81 Pressure transmitter with chemical seal Pressure transmitter with metallic measuring cell VEGAWELL 52 Submersible pressure transmitter with ceramic measuring cell 0.1 % Straining clamp, thread, threaded fitting of 316L, PVDF, Duplex, Titanium

Open the catalog to page 3
Offshore - 4

Offshore Reliable under harsh conditions Offshore platforms and FPSO ships place heavy demands on measurement technology. The instrumentation out on deck is exposed to extreme mechanical and climatic stresses. Wind, storm and saltwater assault the sensors outside, whereas inside the process, very high process temperatures and pressures are the challenge. The plics® instrument generation meets these challenges through the use of both sensor and housing technology optimally adapted to the application. Of course, they are also compliant with the requirements of NACE and NORSOK, as well as all...

Open the catalog to page 4
Offshore - 5

plics® − easy is better Instrument platform plics® The plics® idea is simple: Each instrument is assembled from prefabricated components once the order is received. This modular design allows full flexibility when selecting the required sensor features. You receive your customised, user-friendly instrument within an amazingly short time. The best part: these instruments are more cost-effective and advantageous in every way – throughout their entire life cycle. Display and adjustment The display and adjustment module PLICSCOM is used for measured value indication, adjustment and diagnosis...

Open the catalog to page 5
Offshore - 6

Reliable Reliable measurement, independent of product characteristics Cost effective Maintenance-free operation User friendly Simple setup and commissioning Storage tank for liquid raw materials Level measurement and point level detection of liquid raw materials in storage tanks Oils and alkaline solutions are among the liquid raw materials for the mud mixtures. These additives are stored on the drilling platform in special storage tanks. To ensure the continuous production of drilling mud, the level of raw materials in the storage tanks must be exactly monitored. » VEGAFLEX 81 Level...

Open the catalog to page 6
Offshore - 7

Storage tank for solid raw materials Reliable measurement under Level measurement and point level detection in the storage tank for solid raw materials rough conditions The solid raw materials such as gravel, clay, barite, cement and binders Cost effective are essential for creating the different properties of the drilling mud. Maintenance-free operation despite the presence of abrasive and adhesive products These materials are stored for mud production in storage tanks. To ensure optimal storage, reliable level measurement and point level detection are required. User friendly Simple...

Open the catalog to page 7
Offshore - 8

Reliable Reliable measurement despite rough conditions Cost effective Maintenance-free operation even in adhesive media Mud tank level Level measurement in mud tanks In the mud tanks, agitators or jet nozzles stir and mix the mud to ensure a homogeneous mixture. To enable a continuous process, the level measurement must be reliable and independent of the composition of the drilling mud. User friendly Simple installation thanks to small antenna systems VEGAPULS 64 Non-contact level measurement with radar in mud tanks ■ High measurement accuracy, independent of the properties of the medium ■...

Open the catalog to page 8
Offshore - 9

Reliable Reliable measurement, independent of the characteristics of the drilling mud Cost effective Maintenance-free and accurate determination of mud usage User friendly Simple installation and setup Trip tank Level measurement in the trip tank The drilling mud flowing back under high pressure from the drilling well is held and monitored in the trip tank. This drilling mud is contaminated with sea water, rocks and sand. In addition to materials like rocks and sand, residues of oil and gas are also present. The built-in level measuring system provides feedback about down-well conditions,...

Open the catalog to page 9
Offshore - 10

Reliable Reliable measurement, independent of the process conditions Cost effective Ensures effective processing of the drilling mud User friendly Simple installation and setup from above Shaker Level measurement and point level detection in the shaker Through the effects of strong vibration in the shaker, the liquid and solid components of the drilling mud returning from the borehole are separated from each other. The drilled rock and the sand are disposed of and the valuable drilling mud is fed back into the continuous drilling process. Level measurement and point level detection are...

Open the catalog to page 10
Offshore - 11

Reliable Measurement results are unaffected by process conditions Cost effective Efficient operation and high oil quality User friendly Maintenance-free operation Oil separators Level and pressure measurement in an oil separator The separator vessel contains a mixture of crude oil, gas, water and sand extracted from the subsea well. Precise monitoring of these multiple separation interfaces and emulsions play a vital role in ensuring the quality of the oil separator for separation. Exact control of interfaces, level and pressure allows optimum utilization of the oil separator and increases...

Open the catalog to page 11
Offshore - 12

Reliable High measuring precision, independent of process conditions Cost effective External mounting to the vessel, easily retrofitted User friendly Simple air and water calibration for fast commissioning time Primary desalter Interface tracking in the primary desalter It is important that a desalter unit runs efficiently to prevent corrosion to downstream equipment. When the crude oil mixes with the emulsifying chemicals and water, the resulting emulsion layer makes it difficult for standard level measurement technologies to reliably track the interface. Radiation-based measuring...

Open the catalog to page 12

All VEGA Grieshaber KG catalogs and technical brochures

  1. Image brochure

    68 Pages

  2. VEGAPULS 61

    2 Pages

  3. FIBERTRAC 32

    2 Pages

  4. VEGAMIP R61

    9 Pages

  5. EL 3

    22 Pages