TX-080 Temperature Controlled Crystal Oscillators (TCXO)

Product catalog summary

Overview: The TX-080 series is a Temperature Compensated Crystal Oscillator (TCXO) offering high performance in terms of short-term stability, phase noise, aging, and temperature stability, comparable to Oven Controlled Crystal Oscillators, with a typical power consumption of less than 20 mA.

Specifications:

Frequency Range: 0.5 MHz to 160 MHz
Frequency Stability: Varies with temperature and supply voltage, with options for different ppm levels (±4.6, ±1.0, ±0.5, ±0.2 ppm).
Supply Voltage: Standard 12 VDC, optional 5 VDC.
RF Output: Available in HCMOS, TTL, and Sinewave signals with specific load and signal level requirements.
Phase Noise: Detailed phase noise specifications at various frequencies (10 Hz to 10 kHz).

Features and Options:

Stratum 3 option for enhanced stability.
“1 ppm Forever” option for long-term stability.
Frequency tuning options include fixed, internal mechanical adjustment, or external voltage adjustment.

Applications: Suitable for use in severe environmental conditions, the TX-080 series is designed for applications requiring high stability and low phase noise.

Ordering Information: The product can be customized based on package size, height, supply voltage, stability code, frequency tuning option, RF output code, and temperature range.

Additional Information: Vectron International reserves the right to make changes to the product specifications without notice. Contact information for Vectron International's offices in the USA, Europe, and Asia is provided for further inquiries.

Catalog excerpts

TX-080 Temperature Controlled Crystal Oscillators (TCXO)-3

CodeHeight HӔPin Length LӔ015.4945.842 > 1Output 2Supply3Ground (Case)4Freq. Adjust 5Ground > Vectron International 267 Lowell Road, Hudson, NH 03051 Օ Tel: 1-88-VECTRON-1 http://www.vectron.com size="-1">

Open the catalog to page 3

TX-080 Temperature Controlled Crystal Oscillators (TCXO)-4

Frequency Product FamilyTX: TCXO Tuning Option A: No Tuning B: via internal mechanical C: via external voltage Package 3.2 x 5 mm Height 0: A15.494mm Stability Code 466: 4.6ppm 106: ѱ1.0ppm 507: 0.5ppm 207: ѱ0.2ppm STS: Stratum3 Supply Voltage B: 12 Vdc D: 5 Vdc RF Output Code A: HCMOS B: TTL E: Sinewave Temperature Range E: -40C to +85аC T: 0C to +70аC P: 0C to +50аC Notes: Contact factory for improved stabilities or additional product options. Not all options and codes are available at all 1. frequencies.Unless other stated all values are valid after warm-up time and refer to typical conditions...

Open the catalog to page 4