BIOMASS & PELLETIZING
18Pages

TECHNOLOGY FOR A SUSTAINABLE TOMORROW BIOMASS & PELLETIZING UNTAPPED ENERGY

VECOPLAN Midwest Floyds Knobs, IN. | USA VECOPLAN AG VECOPLAN FuelTrack GmbH Bad Marienberg | Germany VECOPLAN AG St. Egidien | Germany VECOPLAN Ibérica S.L. Mungia | Spain VECOPLAN Austria GmbH Wels | Austria VECOPLAN INTERNATIONAL Waste avoidance, conservation of resources and efcient use of recyclable materials are among the most urgent challenges and tasks of our time. The importance of environmental awareness and sustainability is increasing on a daily basis. Our company has been successfully tackling these challenges for more than 40 years, and today we are a leading partner in the...

VECOPLAN – FOR THE PROTECTION OF THE ENVIRONMENT In every renewable raw material lies vast amounts of energy. We at VECOPLAN specialise in the development and production of high-quality plants and machinery for the shredding, conveying and processing of biomass. Project management Contract negotiations Project cycle 360° PERFORMANCE RANGE OF THE CENTER OF COMEPTENCE Our knowledge and experience are concentrated in our Center of Competence, which keeps a close watch on developments in the Biomass & Pelletizing market segment. In the interests of our customers, we are in a position to respond...

THE RIGHT SOLUTION FOR EVERY MATERIAL Solutions for the processing of: • silage for biogas plants, cereals, organic waste, green waste, wood chips and bark VECOPLAN provides a number of innovative technical solutions from a single source for the necessary processing of biomass for recycling and energy generation. The systems and components we manufacture and sell are used for shredding, conveying, screening, separating and storing biomass. The development and manufacture of plants in the areas of biomass processing and pelletizing is technology-intensive. The processing technology is often...

The products obtained subsequently go on for further processing in the following areas: Biogas production Silage / wood chips / straw Energy recovery BIOMASS IS VERSATILE – JUST LIKE OUR TECHNOLOGY Different source materials place different demands on the technology: VECOPLAN provides a number of innovative technical solutions from a single source for the necessary processing of biomass for recycling and energy recovery. Our plant components are available in an array of congurations and, as such, can be chosen to suit our customers’ particular applications. Customers value our biomass...

Example: Double-shaft shredder (VVZ) SHREDDING IS OUR CORE COMPETENCE Our customers benet from our experience in shredding technology, which has been accumulated over many years. It is a eld we have specialised in ever since the company was founded in 1969. With six types of shredder which differ fundamentally in their structure and form of shredding, we have the appropriate and perfectly tailored shredding technology available for all kinds of biomass. Example: Pipe belt conveyor (VecoBelt) CONVEYING TECHNOLOGY – TAILOR-MADE We have all of the belt, chain, screw and trough conveyors to get...

Example: Oscillation screen (VSS) GETTING THE MOST OUT OF EVERYTHING We have the oscillation, disc and star screeners to achieve a level of sorting which would be difcult to achieve manually. A choice of star and disc screening machines is available for sorting out overlengths and large fractions, as are up to 3-deck circular oscillation screening machines, which are capable of separating material into up to 4 different fractions on screening areas measuring up to 9 m². Example: Overbelt magnetic separator (VÜB) FOCUSING ON THE ESSENTIAL Our separating technology removes everything from...

STORAGE IS NOT AN ART – IT IS A SCIENCE With our machines, it is possible to ll and discharge storage boxes with a capacity of up to 1,300 m³ per box. We also supply uniquely efcient technology for continuous 24-hour discharging which can be used for heating installations, loading and unloading vehicles from storage boxes, and also for discharging from bunkers. We have loading and unloading conveyors, push and pull rod dischargers, and drag chain dischargers, which means state-of-the-art lling and emptying. Example: Dosing unit SUPPLYING THE EXACT MEASURE REQUIRES THE RIGHT TECHNOLOGY We...

SHREDDING IS OUR CORE COMPETENCE Our customers benet from our experience in shredding technology, which has been accumulated over many years. It is a eld we have specialised in ever since the company was founded in 1969 and today we are an international market leader. Our roots are in the Wood market: our rst customers were in the sawmill and furniture industries. The rst complete plant which we supplied to our customers in 1973 was a wood recycling plant. In 1971, we developed the drum chipper and hammer mills with centrifugal wedge clamping system: these shredding machines are used...

DRIVEN BY INNOVATION The engineers and technicians in our Research and Development department work tirelessly to deliver increasingly superior solutions to meet our customers’ varying requirements. A number of patents testify to our technological leadership in the worldwide market. Since the VAZ was brought to market in 1983, the technology has been rened on an ongoing basis. VECOPLAN also holds a patent for the universal cutting unit (U rotor) developed in 1989. There have been further optimisations since then, including the tramp material protection device, pneumaticlowering counter knife...

HiTorc® Revolutionary shredding technology • Direct drive motor / permanently controlled synchronous motor • Greater throughput – lower consumption • Energy saving of approx. 50 % with pre-shredders • Current peaks are roughly halved (compared with asynchronous motor) • Compact / quiet / low-maintenance VecoBelt Pipe belt conveyor – for conveying bulk material on the horizontal or on a slight incline • Continuous distances of up to 400 m • Low-noise and low-dust conveying as belt enclosed in tube Toploader “Wheel loader bucket on rails” • Fully automatic box emptying • Discharge via...