video corpo

CEU-SCA-080-datasheet-en
2Pages

{{requestButtons}}

Catalog excerpts

CEU-SCA-080-datasheet-en - 1

on-line maintenance free super-capacitor UPS Maintenance-free super-capacitor 80W (100W peak) uninterruptible power supply for PC on WINDOWS OS. Output voltage stabilizer. Single conversion line-interactive on-line UPS without trip time or voltage variation when input voltage fails. Compact, 35 mm wide. Easy to use, immediately operational, no programming required. CEU-SCA-080-24 CEU-SCA-080-20 CEU-SCA-080-19 CEU-SCA-080-15 CEU-SCA-080-12 Typical CEU-SCA-080 uses and features Power supply and UPS for PC This compact unit allows to power a PC with 12-15-19-20-24V input with a 24V power supply. The UPS allows to perform the correct shutdown of the PC, when the input voltage is missing. Very easy installation without programming Simply connect the two "24V IN" terminals to the normal 24V power supply and connect the two "OUT" output terminals directly to the PC or PLC or other devices. If using a PC, download the software by connecting to the website by reading the QR-code on the ups label. Can be used to make the industrial equipment conform to industry 4.0 standard The automated integration of the plant with the factory logistics system or the supply network must be ensured under all conditions, even in the event of a power failure. The UPS system makes the equipment fully compliant with Italian industry 4.0 regulations, guaranteeing the transfer of any last information contained in the PLC before the power failure. Can be used to properly set up the pneumatic part following a voltage drop Some systems following a voltage drop may position pneumatic actuators in such a position that they could produce damage, perhaps resting on parts still moving by inertia. The power supply through UPS of the PLC and some solenoid valves, even for a few seconds, allows to secure the pneumatic part avoiding to use the most expensive bistable valves. Can be used to stabilize the voltage of precision devices These UPS having the single conversion module always on, can be used to stabilize the output voltage from any fluctuations in the input voltage without switching delay time. The input voltage is always electronically separated, only the 0 V is common. Precision devices and measuring equipment increase their reliability because HUE-UPS cancels disturbances from the 24V power supply. Subject to changes © Copyright VEA S.R.L.

Open the catalog to page 1
CEU-SCA-080-datasheet-en - 2

Unless otherwise specified, all data for the nominal input voltage and temperature +25°C apply. Subject to changes © Copyright VEA S.R.L.

Open the catalog to page 2

All VEA Srl catalogs and technical brochures