Brazed Plate Heat Exchanger

Product catalog summary

Overview
This document is a technical data sheet for various models of Brazed Plate Heat Exchangers manufactured by VAU Thermotech GmbH & Co. KG. It includes detailed specifications, materials used, operating conditions, design specifications, and compliance with safety standards.

Materials
All models use AISI 316L stainless steel for plates and connectors/fittings, with 99.9% copper used for brazing. The product is labeled as temperature resistant.

Operating Conditions
The heat exchangers operate within an environmental temperature range of 40 to 105°F and can be stored or transported between -40 to 180°F. The maximum allowed pressure is 435 psi, with a test pressure of 652 psi. The minimum allowed temperature is 14°F, and the maximum is 383°F. The maximum delta T between primary and secondary is 302°F.

Design Specifications
Each model has specific design specifications, including weight, surface area, and dimensions. The document provides detailed measurements for each model, including the number of plates, length, width, height, and depth.

Fittings
Fittings are available in threaded (NPT and BSPP), sweat (solder), and ProPress options. Standard male NPT sizes vary by model, ranging from 3/4 inch to 2 inches.

Safety Standard Compliance
The products comply with several DIN standards, including DIN 4751 for mechanical safety equipment for hot water heating systems, DIN 4753 for water heaters/heating installations for drinking and service water, and DIN 1988 for technical regulations for drinking water installations.

Conclusion
This technical data sheet provides comprehensive information on the materials, operating conditions, design specifications, and safety compliance of VAU Thermotech's Brazed Plate Heat Exchangers, ensuring they meet industry standards and requirements.

Catalog excerpts

Brazed Plate Heat Exchanger Technical Data Sheet VAU Thermotech GmbH & Co. KG, An der Schmücke 16, 06577 Heldrungen Tel.: +49 (0) 34673-1683-00 - Fax: +49 (0) 34673-1683-50 E-Mail: [email protected] - www.vau-thermotech.de

Open the catalog to page 1

Brazed Plate Heat Exchanger Technical Data Sheet VM 15Fittings are available for threaded (NPT and BSPP), sweat (solder), and ProPress. Male NPT 3/4 inch is standard for both primary and secondary port connections. 1. Materials_ Product Label: Temp. Restistant 3. Safety Standard Compliance (To the extent that the product is used in an application corresponding to these standards.) DIN = German National Standards (Deutsches Institut fur Normung e.V.) DIN 4751 - Mechanical Safety Equipment for Hot Water Heating Systems DIN 4753 - Water Heaters/Heating Installations for Drinking & Service Water DIN...

Open the catalog to page 2

Brazed Plate Heat Exchanger Technical Data Sheet VM 25Fittings are available for threaded (NPT and BSPP), sweat (solder), and ProPress. Male NPT 3/4 inch is standard for both primary and secondary port connections. 1. Materials_ Product Label: Temp. Restistant 3. Safety Standard Compliance (To the extent that the product is used in an application corresponding to these standards.) DIN = German National Standards (Deutsches Institut fur Normung e.V.) DIN 4751 - Mechanical Safety Equipment for Hot Water Heating Systems DIN 4753 - Water Heaters/Heating Installations for Drinking & Servce Water DIN...

Open the catalog to page 3

Brazed Plate Heat Exchanger Technical Data Sheet VM 30Fittings are available for threaded (NPT and BSPP), sweat (solder), and ProPress. Male NPT 1 inch is standard for both primary and secondary port connections. 1. Materials_ Product Label: Temp. Restistant 3. Safety Standard Compliance (To the extent that the product is used in an application corresponding to these standards.) DIN = German National Standards (Deutsches Institut fur Normung e.V.) DIN 4751 - Mechanical Safety Equipment for Hot Water Heating Systems DIN 4753 - Water Heaters/Heating Installations for Drinking & Servce Water DIN...

Open the catalog to page 4

Brazed Plate Heat Exchanger Technical Data Sheet VM 55Fittings are available for threaded (NPT and BSPP), sweat (solder), and ProPress. Male NPT 1 inch is standard for both primary and secondary port connections. 1. Materials_ Product Label: Temp. Restistant 3. Safety Standard Compliance (To the extent that the product is used in an application corresponding to these standards.) DIN = German National Standards (Deutsches Institut fur Normung e.V.) DIN 4751 - Mechanical Safety Equipment for Hot Water Heating Systems DIN 4753 - Water Heaters/Heating Installations for Drinking & Servce Water DIN...

Open the catalog to page 5

Brazed Plate Heat Exchanger Technical Data Sheet VM 60 Fittings are available for threaded (NPT and BSPP), sweat (solder), and ProPress. Male NPT 1 1/4 inch is standard for both the primary and secondary port connections. 1. Materials_ Product Label: Temp. Restistant 3. Safety Standard Compliance (To the extent that the product is used in an application corresponding to these standards.) DIN = German National Standards (Deutsches Institut fur Normung e.V.) DIN 4751 - Mechanical Safety Equipment for Hot Water Heating Systems DIN 4753 - Water Heaters/Heating Installations for Drinking & Service...

Open the catalog to page 6

Brazed Plate Heat Exchanger Technical Data Sheet VM 85 Fittings are available for threaded (NPT and BSPP), sweat (solder), and ProPress.Au&engewinde G 2Male NPT 2 inch is standard for both primary and secondary port connections. 1. Materials_ Product Label: Temp. Restistant 3. Safety Standard Compliance (To the extent that the product is used in an application corresponding to these standards.) DIN = German National Standards (Deutsches Institut fur Normung e.V.) DIN 4751 - Mechanical Safety Equipment for Hot Water Heating Systems DIN 4753 - Water Heaters/Heating Installations for Drinking...

Open the catalog to page 7

Brazed Plate Heat Exchanger Technical Data Sheet VM 85 DN 50 FlangeFittings are DN 50 flange Standard fittings are DN 50 DIN 2656 1. Materials_ Product Label: Temp. Restistant 3. Safety Standard Compliance (To the extent that the product is used in an application corresponding to these standards.) DIN = German National Standards (Deutsches Institut fur Normung e.V.) DIN 4751 - Mechanical Safety Equipment for Hot Water Heating Systems DIN 4753 - Water Heaters/Heating Installations for Drinking & Service Water DIN 1988 (parts 1-7) - Tech. Regulations for Drinking Water Installations 2. Operating...

Open the catalog to page 8

VAU Thermotech GmbH & Co. KG An der Schmücke 16 06577 Heldrungen Tel.: +49 (0) 34673-1683-00 Fax: +49 (0) 34673-1683-50 E-Mail: [email protected] www.vau-thermotech.de VAU Thermotech GmbH & Co. KG, An der Schmücke 16, 06577 Heldrungen Tel.: +49 (0) 34673-1683-00 - Fax: +49 (0) 34673-1683-50 E-Mail: [email protected] - www.vau-thermotech.de

Open the catalog to page 9

Brazed Plate Heat Exchanger

Brazed Plate Heat Exchanger

Catalog excerpts

All VAU Thermotech GmbH & Co. KG catalogs and technical brochures