• Sizes range from DN 16 to 160 mm (⅝" to 6").
• Available with manual or pneumatic actuators.
• Body materials include aluminum or stainless steel.
• Feedthrough bellows with intermediate pumping port.
• Standard flanges include weld neck, ISO-KF / ISO-K, or customized options.

The angle valve is designed for processes involving aggressive and corrosive gases and is subject to the Non-Proliferation Treaty (NPT).

• Leak rate: Valve body < 1 · 10^-9 mbar ls^-1, Valve seat < 1 · 10^-7 mbar ls^-1.
• Pressure range: 1 · 10^-7 mbar to 4 bar (abs).
• Differential pressure on the plate: ≤ 4 bar.
• Differential pressure at opening: ≤ 1 bar.
• Cycles until first service: 5000.
• Temperature limits vary based on materials and conditions, up to 120°C.
• Materials include aluminum EN AW-5049, EN AW-6082, and stainless steel AISI 316L.
• Seal materials vary by body type and size.
• Mounting position is flexible.
• Solenoid valve operates at 24 V DC.
• Position indicator voltage: 5 – 50 V AC/DC, current: 5 – 100 mA.

Valves are available with manual or pneumatic actuators, with various configurations for different sizes and materials. Specific ordering numbers are provided for each configuration.

• Manual actuator with torque handwheel or electrical position indicator.
• Pneumatic actuator with opening spring (NO).
• Customer-specified flanges and inline versions available.
• Other options available upon request.

Dimensions are available upon request.