Main applications (For large gas flows we recommend Ordering information Valve with manual actuator removable handwheel Valve with pneumatic actuator single acting with closing spring (NC) without solenoid valve without position indicator Valve with pneumatic actuator single acting with opening spring (NO) without solenoid valve without position indicator Further ordering information on next page

Technical data Leak rate: valve body, valve seat Pressure range, series 24 (shaft feedthrough) Pressure range, series 26 Differential pressure on the plate Differential pressure at opening <1 bar - Further technical data on next page Continued Ordering information Valve with pneumatic actuator double acting without solenoid valve without position indicator without solenoid valve, with position indicator: 264 . . -Q . 24 with solenoid valve, without position indicator: 264 . . -Q . 34 (specify control voltage) with solenoid valve, with position indicator: 264 . . -Q . 44 (specify control voltage)...

Continued Technical data Reduced lifetime with venting applications Maximum values: depending on operating conditions 31 Tested at room temperature under clean and static conditions Cycles until first service - Valve body - Manual and pneumatic actuator - Solenoid valve, position indicator - Valve body - stainless steel Seal: bonnet, plate Mounting position Solenoid valve Position indicator: contact rating Valve position indication

Solenoid valve Position indicator One closing contact each for the open and closed valve positions - Other solenoid valve voltage (standard: 24 V DC) - Solenoid valve with manual emergency operation - Position indicator bakeable to 120 °C or 200 °C - Common connector for solenoid valve and position indicator (up to 48V only) - Customer specified actuators - Other sealing materials - Customer specified bodies Ordering information for options: Ordering No. of valve-X (e. g. 26432-KA41-X, X = pos. indicator bakeable to 200 °C) Spare parts on request (specify fabrication number of valve) on request...

Angle valve with manual actuator Angle valve with manual actuator 1) Gate stroke is longer due to transmission Inline valve with manual actuator ISO-KF DN 16 (%") stainless steel stainless steel (vertical design)

Angle valve with pneumatic actuator, single acting with closing

Angle valve with pneumatic actuator, double acting V Valve seat side m Mechanical position indication © Leak detection hole Inline valve with pneumatic actuator, single acting with closing Inline valve with pneumatic actuator, single acting with closing

Main applications For pumping and venting of HV systems where no compressed air is available Ordering information Ordering numbers Angle valve Valve with electromagnetic actuator single acting with closing spring (NC) with control electronics with position indicator Inline valve stainless steel Leak rate: valve body, valve seat Pressure range Differential pressure on the plate Technical data stainless steel Temperature 1) Material – Valve body - aluminum - stainless steel Seal: bonnet, plate Mounting position Mains voltage Starting power / holding power Closing or opening time Operating frequency...

Body material: aluminum or stainless steel Angle and inline version Best conductance in its class Resistant against differential pressure Long lifetime Angle valve DN 10 – 40 ( " – 1½") ISO-K Bonnet seal Bellows Closing spring Plate seal Valve seat side Inline valve DN 16 – 40 ( " – 1½") ISO-KF Valve seat side Required for dismantling Control electronics connection Leak detection hole mm DN inch A inch B inch D inch L L = aluminum L1 = stainless steel