• Opening sizes range from 81 × 800 mm to 250 × 2300 mm (3.19" × 31.50" to 9.84" × 90.55").
• Pneumatic actuator with double acting and position indicator.
• Gate material is aluminum.
• Utilizes L-VAT sealing technology.
• Designed for FPD and PV production systems with shock-free L-movement and particle-free operation.
• Low cost of ownership.

The valve operates with a closed, open, and optically closed state, ensuring efficient sealing and operation.

• Leak rate: Gate in closing direction is less than 1 · 10^-7 mbar ls^-1 with a differential pressure of 1 bar.
• Differential pressure on the gate: ≤ 1 bar in closing direction and ≤ 5 mbar in opening direction.
• Cycles until first service: 1 million cycles, reduced to 0.5 million if actuator is mounted laterally.
• Closing or opening time: ≤ 2.5 seconds.
• Temperature limits: Gate ≤ 120 °C, Actuator and position indicator ≤ 80 °C.
• Materials: Gate made of EN AW-5083, actuator shafts of AISI 304, and connecting parts of EN AW-6082.
• Seals: Gate and actuator use FKM (Viton®), with NBR for the pressure plate.
• Mounting position: Actuator can be mounted up, down, or laterally.
• Position indicator voltage: 10 – 30 V DC PNP, with NPN optional.

• Solenoid valve for impulse actuation available at 24 V DC, with other options on request.
• Surface treatments such as hard anodized or nickel-plated aluminum available.
• Other sealing materials can be requested.

Ordering numbers are available upon request, with an example provided as 0780X-UA24- . . . .