INDEX OF STEEL INDUSTRIAL VALVES ITEM STRAIGHT PATTERN STOP VALVES PN 40 DN 15 - 250 for general application with control disc for general application for petroleum products for naval application STRAIGHT PATTERN STOP VALVES PN 40 DN 15 - 250 for electric actuator for general application with control disc for general application STRAIGHT PATTERN STOP VALVES PN 40 DN 15 - 80 for pneumatic actuator STRAIGHT PATTERN STOP VALVES WITH BELLOWS PN 40 DN 15 - 200 for general application with control disc for general application STRAIGHT PATTERN STOP VALVES PN 40 DN 15 - 100 made of acid resisting materials ANGLE PATTERN STOP VALVES PN 40 DN 15 - 250 for general application with control disc for general application for petroleum products for naval application STRAIGHT PATTERN STOP VALVES PN 160 DN 10 - 50 stop type stop type with control disc ANGLE PATTERN HIGH PRESSURE STOP AND START-UP VALVES FOR ACTUATORS PN 260 stop type start - up type STRAIGHT PATTERN HIGH PRESSURE STOP VALVES PN 320 DN 15 - 100 BW with handwheel with control disc and handwheel

with control disc and for actuator 10. STRAIGHT PATTERN HIGH PRESSURE VALVES PN 180 11. STRAIGHT PATTERN HIGH PRESSURE VALVES PN 320 ZWP 1 12. STRAIGHT PATTERN STOP VALVES WITH BELLOWS 450 M 13. ANGLE PATTERN FLANGED STOP VALVES W. BELLOWS 222 M 14. FLANGED STOP VALVES WITH BELLOWS PN 40 DN 32 - 100 218M/222M STRAIGHT PATTERN AND ANGLE PATTERN 15. FLANGED STOP VALVES WITH BELLOWS PN 40 DN 125 - 250 218M/222M STRAIGHT PATTERN AND ANGLE PATTERN 16. FLANGED STOP VALVES PN 100 DN 15 - 25 422/1 18. FLANGED STOP VALVES PN 100 DN 32 - 80 430 20. BW STOP VALVES PN 320 DN 6 - 25 OBLIQUE FORM 675 STAINLESS...

STRAIGHT PATTERN STOP VALVES PN 40 WITH HAND WHEEL FLANGED AND WITH BUTT WELDED ENDS DN15 – DN250 The valves are designed for application in pipeline installations conducting non-aggressive and non-toxic media. They are manufactured in following versions: • for general application: type ZPZ1, ZPR1 • for petroleum products: type ZFZ1 • for naval application: type ZMZ1 DN15-DN25 Disc fixed with wire (standard version for DN15-DN25) 20 40 Body: Materials: Bonnet: Trim: Packing: Disc fixed with screw plug (special version for DN15-DN25) Back seat, valves for petroleum products, type ZFZ1 Stop valve...

STRAIGHT PATTERN STOP VALVES PN 40 FOR ACTUATOR FLANGED AND WITH BUTT WELDED ENDS DN15 – DN250 The valves are designed for pipeline installations of non-aggressive and non-toxic media. They are designed for general application: type ZPZ2, ZPR2 /version with control disc/ and are suitable for mounting of drive – electro-mechanical actuator type NWA -1, manual operation gear type NGR or another actuator specified while ordering. Stop valve with control disc type ZPR2 a - direction of flow for DN32-DN100 b - direction of flow for DN125-DN250 Materials Body: Bonnet: Trim: Packing: carbon cast steel...

STRAIGHT PATTERN STOP VALVES PN 40 FOR PNEUMATIC ACTUATOR FLANGED AND WITH BUTT WELD ENDS DN15 – DN80 The valves are designed for application in pipeline installations conducting non-aggressive and non-toxic media. They are designed for general application - type ZPZ1P. They are suitable for mounting of one way action pneumatic actuator type: • R1B – springs close the valve while air pressure failure • P1B – springs open the valve while air pressure failure Materials Body: Bonnet: Trim: Packing: DN 15 ÷ 25 carbon steel DN 32 ÷ 80 carbon cast steel DN 15 ÷ 25 carbon steel DN 32 ÷ 80 carbon cast...

STRAIGHT PATTERN STOP VALVES PN 40 WITH BELLOWS WITH HANDWHEEL FLANGED AND WITH BUTT WELD ENDS DN15 – DN200 The valves are designed for application in pipeline installations conducting non-aggressive and non-toxic media where high tightness of stuffing box is necessary. They are produced in following versions: stop valves for general application: stop valves with control disc for general application: Stop valve with control disc, type ZPM2R, DN15- DN100 Materials Body: Bonnet: Trim: Packing: Bellow: carbon steel carbon cast steel carbon steel carbon cast steel stainless steel (min.18%Cr) reinforced...

STRAIGHT PATTERN STOP VALVES PN 40 MADE OF ACID RESISTANT MATERIALS,WITH HAND WHEEL FLANGED DN15 – DN100 The valves are designed for pipeline installations of liquid and gaseous aggressive media. They are produced in following version: • stop valves: type ZAZ1 Maksymalna dopuszczalna temperatura pracy TS, ºC 100 Maksymalne dopuszczalne ciśnienie pracy PS, bar 40 29 27 26 24 Materials Body: Bonnet: Trim: Stem: Disc: Packing: DN 15 ÷ 25 DN 32 ÷ 100 DN 15 ÷ 65 DN 80 ÷ 100 integral stainless steel stainless steel reinforced graphite stainless steel stainless cast steel stainless steel stainless cast...

ANGLE PATTERN STOP VALVES PN 40 WITH HAND WHEEL FLANGED AND WITH BUTT WELD ENDS DN15 – DN200 The valves are designed for application in pipeline installations conducting non-aggressive and non-toxic media. They are manufactured in following versions: • • • for general application: type ZCZ1 / ZCR1 – version with control disc for petroleum products: type ZEZ1 for naval application: type ZDZ1 DN 15 – DN 25 Disc fixed with wire (standard version for DN15-DN25) Disc fixed with screw plug (special version for DN15-DN25) Stop valve with control disc, type ZCR1, DN15DN100 Back seat, valves for petroleum...

STRAIGHT PATTERN STOP VALVES FLANGED AND WITH WELDING ENDS PN160 DN10 - DN50 The valves are designed for application in pipeline installations conducting petroleum products, steam, water and other nonaggressive and non toxic liquid and gaseous media. They are manufactured in following versions: • stop valves - type ZSZ stop valves with control disc – type ZSR Operating data Maximum permissible operating temperature, TS, °C Material A. m. data are maximum permitted parameters for valves with flanges PN160. For valves with butt welding ends, data PS and TS marked on bodies are obligatory Dimensions...