INDUSTRIAL VALVES INDEX OF CAST IRON INDUSTRIAL VALVES ITEM DESCRIPTION FIGURE CHECK VALVES 01. STRAIGHT CHECK VALVES THREADED PN 16 DN 10-50 277 02. STRAIGHT CHECK VALVES FLANGED PN 6-25 DN 15-300 287 03. ANGLE CHECK VALVES FLANGED PN 6-25 DN 15-300 288 04. SWING CHECK VALVES PN 10-16 DN 40 - 300 302 05. CHECK VALVES FLANGED PN 16 DN 50-250 402 06. CHECK VALVES WAFER TYPE PN 10, 16 DN 50-400 407 07. BACK FLOW PREWENTER PN 10 DN 65 - 150 405 08. BACK FLOW PREWENTER, bras, bronze PN 10, DN 15-50 406 09. BACK FLOW PREWENTER PN 16 DN 50 - 250 408 10. SCHUSTER ELBOW BALL CHECK VALVES PN 6 11. BALL CHECK VALVES PN 16 DN 50 - 400 12. BALL CHECK VALVES PN 16 DN 65 13. BALL CHECK VALVES PN 16 14. CHECK VALVES FLANGED PN 16 DN 50 - 150 6525 VARIMEX VALVES CO.LTD

INDUSTRIAL VALVES CHECK VALVE • compact settlement hot cold and cooling water plants low-pressure steam plants • industrial technologies • neutral fluids VARIMEX VALVES CO.LTD

INDUSTRIAL VALVES CHECK VALVE correspond to the pressure equipment directive 97/23/EC » compact settlement face-to-face dimension according to EN 558-1 series 1 flanges drilled according to EN 1092-1 for type F • flanges drilled according to EN 1092-2 for type A,C,E • hot and cold water plants • steam plants • heat and refrigerating engineering, VARIMEX VALVES CO.LTD

INDUSTRIAL VALVES CHECK VALVE correspond to the pressure equipment directive 97/23/EC • compact settlement • face-to-face dimension according to EN 558 series 8 • flanges drilled according to EN 1092-2 • hot and cold water plants • steam plants • industrial technologies • neutral fluids • heat and refrigerating engineering, VARIMEX VALVES CO.LTD

INDUSTRIAL VALVES CHECK VALVE • compact settlement flanges drilled according to EN 1092-2 face-to-face dimension according to EN 558-1 series 48 • hot and cold water plants • steam plants • industrial technologies • neutral fluids • heat and refrigerating engineering, VARIMEX VALVES CO.LTD

INDUSTRIAL VALVES CHECK VALVE • allows Installation In all positions > hot and cold water plants low-pressure steam plants VARIMEX VALVES CO.LTD

INDUSTRIAL VALVES CHECK VALVE wafer type • hot and cold water plants • low-pressure steam plants • chemical plands • food plands VARIMEX VALVES CO.LTD

INDUSTRIAL VALVES BACK FLOW PREVENTER compact monobloc construction • epoxy coating inside and outside • silicon seal » reduced pressure principle prevents potentially contaminated fluid » polluting in the supply system easy to install and to maintain • water supply system VARIMEX VALVES CO.LTD

INDUSTRIAL VALVES BACK FLOW PREVENTER • compact monobloc construction • silicon seal > reduced pressure principle prevents potentially contaminated fluid polluting in the supply system • easy to install and to maintain water supply system VARIMEX VALVES CO.LTD

INDUSTRIAL VALVES VARIMEX ybLves CHECK VALVE ■ allows Installation in all positions prevents potentially contaminated fluid polluting in the supply system • easy to install and to maintain • valve has a back flow preventrer features class EA • water supply system VARIMEX VALVES CO.LTD

Fig. 6001, 6011 BLACK CHECK VALVE ELBOW working pressure - PS 6 bar medium temperature - max.40°C (temporarily 60°C) fitting lenght - according to the table flanges - EN 1092-2 thread connections EN-ISO 228 -1 requirements and investigations EN 12050-4,EN 12050-1. Design features: - compact and simply construction - high durability - easy inside acces and to ball, - silent and unfailing operation, - bonnet service position - on two spindels, - full open valve for fluid speed from 0,7 m/s, - perform conditions clearance for solid parts (EN 12050-4) without forced ball wibrations, - paint - epoxide...

Fig. 6516, 6526 BLACK CHECK VALVE FLANGED face to face lenght acc. EN 558-1: 2001 flanges acc. EN 1092-2: 1999 leakproofness class - A working pressure PN16 medium temperature up to 120°C Design features: ¯ eliwo szare, ¿eliwo sferoidalne EN-GJL-250, PN-EN 1561:2012 EN-GJS-400-15, PN-EN 1563:2012 ¯ eliwo szare, ¿eliwo sferoidalne EN-GJL-250, PN-EN 1561:2012 EN-GJS-400-15, PN-EN 1563:2012 ¯ eliwo szare EN-GJL-250, PN-EN 1561:2012 Aluminium AlSi PN-EN 1706: 2001 Guma NBR, EPDM PN-ISO 1629: 2005 Guma NBR, EPDM PN-ISO 1629: 2005 stal Fe/Zn5, stal nierdzewna PN-EN ISO 4762: 2006 Screw stopper Standard...

Fig. 6517, 6527 BALL CHECK VALVE Technical data: Design features: Guma, Rubber, Gummi NBR, EPDM - compact and simply construction - high durability, - easy inside acces and to ball, - silent and unfailing operation, - close leakproofness at 0,05 MPa, - full open valve for fluid speed from 1 m/s, - perform conditions clearance for solid parts (EN 12050-4) without forced ball wibrations, - epoxide paint to build 250 µm, RAL 5015 (other color)*; - Hygienic Atest PZH Force ring Screw stopper Parafina Paraffin working pressure - PN16 (10) medium temperature - 70°C Application: - for sewage: with fecal...

Fig. 6616, 6626 BALL CHECK VALVE WITH THREADED END Technical data: face to face lenght acc. to drawing thread connections acc. PN-EN 10226-1:2006 leakproofness class - A working pressure PN16 medium temperature up to 120°C ¯ eliwo szare, ¿eliwo sferoidalne EN-GJL-250, PN-EN 1561:2012 EN-GJS-400-15, PN-EN 1563:2012 ¯ eliwo szare, ¿eliwo sferoidalne EN-GJL-250, PN-EN 1561:2012 EN-GJS-400-15, PN-EN 1563:2012 Design features: Aluminium AlSi PN-EN 1706: 2001 Guma NBR, EPDM PN-ISO 1629: 2005 Total sufrace rubbered ball. Drain plug execution possibility. . All parts are protected against corrosion Guma...

Technical data: flanges acc. EN 1092-2 leakproofness class - A working pressure PN10, PN16 medium temperature up - to 120°C ¯ eliwo szare EN-GJL-250 PN-EN 1561: 2012 ¯ eliwo szare EN-GJL-250 PN-EN 1561: 2012 Valve head Design features: 3. Fence ¯ eliwo szare EN-GJL-250 PN-EN 1561: 2012 Stal nierdzewna X8CrNiS18-9 PN-EN 10088-1: 2007(1.4305) All parts are protected against corrosion. Standard execution: PN16, 70 o C, epoxide paint RAL5005 250µm. Return valve prevents the liquid in pump systems. Assembly: Installation in any position. *- other executions on request VARIMEX VALVES CO.LTD