Leonardo D Maximum power 275 kVAr Modular power factor correction equipment, for indoor floor installation, on metal skirting with cable entry from the top . Made of RAL 7035 painted metal sheet with frontal panel and closed with screws. Inside there is a disconnector switch properly dimensioned to sustain the maximum selectable power in kVAr, terminals for CT connection and alarm contact from the regulator in case of overvoltage, overcurrent, over-under compensation, overtemperature and over THDI. Regulator RDM 6 STANDARD with 6 batteries, THDI control, temperature control, option fixed battery, cumulative alarm contact. 6 possible battery with 22 total units. Fast plug and play connectors for a smart and safe connection with Jolly modules of all the available version TECHNICAL DATA EQUIPMENT kVAr Tree-phase power supply, Un Rated frequency Auxiliary circuits voltage Main disconnector swich Ambient temperature limits min-max Reactive Power Degree of protection Available slots (for Jolly modules) TECNICAL DATA REGULATOR RDM 6 Standard N° Control Batteries Manual / Automatic Overvoltage, Overcurrent, Over, Undercompensation,Overtemperature, THDI% LCD 2 lines 16 characters backlight display Parameters displayed on the display Voltage, Current, Cos φ, Δ kVAr Parameter detected Voltage, Current, Cos φ, 2 or 4 quadrant mode Power factor adjustment Range primary current transformer Reactive power capacitor bank Sensitivity adjustment Reconnection time Range capacitor voltage Contact arrangement alarm Alarm relay contacts capacity Absorbed power Accomplished standards VAREL s.r.l. - Via dell'Artigianato 31 - 36043 Camisano Vicentino (VI) Italy - Tel. +39 0444 410400 - Fax +39 0444 412035 - www.varelit.com - i