Leonardo C
Leonardo C
The equipment is a modular power factor correction system designed for floor installation. It is constructed from RAL 7035 painted metal sheet with a frontal panel and secured with screws. The system includes a disconnector switch capable of handling a maximum power of 175 kVAr. It features terminals for CT connection and an alarm contact for conditions such as overvoltage, overcurrent, over-under compensation, overtemperature, and over THDI.
Regulator RDM 6 Standard
The regulator includes 6 batteries with THDI and temperature control, and an option for a fixed battery. It has a cumulative alarm contact and supports fast plug-and-play connections with Jolly modules. The regulator displays parameters such as voltage, current, Cos φ, and operates in 2 or 4 quadrant modes.
Electrical Characteristics
- Rated Frequency: 50 Hz
- Voltage: 400 V (with options for 110V and 230V)
- Maximum Power: 175 kVAr
- Degree of Protection: IP
- Ambient Temperature Limits: -15°C to +35°C
- Dimensions: 810 x 684 x 400 mm
Standards and Compliance
The equipment complies with standards CEI EN 61921, CEI EN 60439-1, and CEI EN 60831-1.
Additional Features
- LCD display with 2 lines and 16 characters
- Manual/Automatic operation
- Alarm relay contacts capacity: 8A - 250V (AC)
- Natural ventilation
- Reconnection time and sensitivity adjustment available
Contact Information
VAREL s.r.l., Via dell'Artigianato 31, 36043 Camisano Vicentino (VI) Italy. Tel: +39 0444 410400, Fax: +39 0444 412035, Website: www.varelit.com, Email: [email protected]
Catalog excerpts
Leonardo C Maximum power 175 kVAr Modular power factor correction equipment, for floor installation, on metal skirting with cable entry from the top. Made of RAL 7035 painted metal sheet with frontal panel and closed with screws. Inside there is a disconnector switch properly dimensioned to sustain the maximum selectable power in kVAr, terminals for CT connection and alarm contact from the regulator in case of overvoltage, overcurrent, over-under compensation, overtemperature and over THDI. Regulator RDM 6 STANDARD with 6 batteries, THDI control, temperature control, option fixed battery, cumulative alarm contact. 6 possible battery with 14 total units. Fast plug and play connectors for a smart and safe connection with Jolly modules of all the available version. TECHNICAL DATA EQUIPMENT Reactive Power Tree-phase power supply, Un Rated frequency Auxiliary circuits voltage Main disconnector swich Ambient temperature limits min-max Dimensions (HxWxD) Available slots (for Jolly modules) TECNICAL DATA REGULATOR RDM 6 Standard N° Control Batteries Manual / Automatic Overvoltage, Overcurrent, Over, Undercompensation,Overtemperature, THDI% LCD 2 lines 16 characters backlight display Parameters displayed on the display Voltage, Current, Cos φ, Δ kVAr Parameters detected Voltage, Current, Cos φ, 2 or 4 quadrant mode Power factor adjustment Range primary current transformer Reactive power capacitor bank Sensitivity adjustment Reconnection time Range capacitor voltage Contact arrangement alarm Alarm relay contacts capacity Absorbed power Accomplished standards VAREL s.r.l. - Via dell'Artigianato 31 - 36043 Camisano Vicentino (VI) Italy - Tel. +39 0444 410400 - Fax +39 0444 412035 - www.varelit.com - i
Open the catalog to page 1All Varel Srl catalogs and technical brochures
Leonardo D1 Page
Leonardo B1 Page
Leonardo A1 Page