EXTRACTION ARMS TECHNICAL SPECIFICATIONS MODEL: EK-1 ARMS WTH INTERNAL CARRIER • EK-1 models are low-cost arms and they are designed for any Industrial ventilation requirements. • Extraction arms will be brought easily Into any desired position and wll stay In equilibrium at that position. It will retain self-supporting. • The extraction hood made of aluminium Is resistant to sparks, hot particles and mechanical enforcements. • The flexible hose made of polyurethane Is flame retardant acc. to DIN 4102-B1 and has high resistance against abrasion and wear. • The hood can be equipped with rotary damper, depending on customer requests. • The flange style of the extraction hoods provide a high capture > The following flexible hose types are available according to the chemical/physical properties of the extracted dust and fume; • AS Hose: Anti-static hose acc. to DIN 53486 (R<10sohm). • PAA Hose: Flame retardant polyurethane hose acc. to DIN4102-B1, highly resistant against abrasion and wear. • HH Hose: Food proved acc. to FDA, resistant to hydrolysis and • The requested hose type is indicated with an abbreviation added to the model indication of the extraction arm. EK-13.160.AS: Indicates 3 meter long, EK-1 model extraction arm, with 160mm diameter, anti-static hose . ® Ongoing product development may subject the technical specifications to alteration without notice. VANTFRM A^ GOSB 800 Sok- No: 4 Tel : 0262-751-05-94 web : www.vanterm.com trxlvl r\\p. Gebze/Kocaeli Faks : 0262-751-13-50 e-mail: [email protected]