Semi-fi nished Fluoropolymers: Tubes, rods, sheets, tapes
4Pages

Semi-finished Fluoropolymers: Tubes, rods, sheets, tapes High quality semi-finished billets, rods, plates and sheets provide the basis for your high performing products. Vanéflon’s vertical moulding process offers parts with low residual stress for excellent machinability. Controlled raw materials and semi-finished products combined with our inhouse material knowledge ensure highest quality parts with excellent chemical and mechanical properties. 100+ stock compounds are available for custom designs. Vanéflon – High Performance Plastics. High Performance Solutions High Quality, certified raw materials. Continuous quality process control Vertical moulding process Low internal stress due to moulding process Excellent machinability Superior chemical and mechanical characteristics 100+ compounds in stock Certificates (3.1, FDA, 2.1,…) PTFE | TFM® | PFA | PCTFE | FEP | ETFE PEEK | PPS | PI (Vespel®) | PEI | PEKK PVDF

StAINLeSS SteeL High compression resistance, only for low PV-values. Used for seats in steam valves. Ptfe and COMPOUNDS* VIRGIN Ptfe Has a wide range of applications. Especially where no high mechanical strength is required and where the use of compounds is not allowed. Because of its purity, inertness, high temperature resistance and electrical isolating properties, PTFE finds most of its applications in the chemical, food, pharmaceutical and electrical industry. tfM (Modified Ptfe) Same as VIRGIN PTFE but with improved creep resistance. Offers excellent weldability and reduced porosity....

The quality of each compound can be greatly influenced by the production methods, the origin of the fillers and the choice of the basic raw material. Modified PTFE’s, non fluorine polymers and other naturel or synthetic products lead to new compounds and new applications. *Modified PTFE Density Hardness Shore D Tensile strength (23°C) Elongation at break (23°C) Tensile modulus (23°C) Coefficient of thermal expansion (20-150°C) Coefficient of thermal expansion (150-260°C) Thermal conductivity (23°C) Deformation after 24h at 23°C - 15 N/mm² Deformation after 24h at 260°C - 4 N/mm² Compr....

Vanéflon Industrieterrein Zwaarveld 12 9220 Hamme, België Tel.: +32 (0)52 47 63 99 info@vaneflon.be www.vaneflon.be tubes, rods, sheets, tapes The quality of your semi-finished polymer billets, rods, plates, sheets and tapes forms the basis of the performance of your finished products in numerous applications. Our materials find their way into enormous seals, where defects are not an option, or into tiny precision components, where the tightest tolerances are essential. Vanéflon’s semi-finished products provide the perfect starting material for precision machining needs. The vertical...