Sealing Solutions: Steel Lined Gaskets
4Pages

Sealing Solutions: Steel Lined Gaskets Vanéflon’s PTFE steel lined gaskets are available in standard sizes and as custom parts made to your specifications. Our self-lubricating gaskets are resistant to most chemicals, feature low permeability and low water absorption. They are blow-out proof and conform to TA-Luft VDI-2200 and 2400. Vanéflon’s manufacturing experience allows for a large choice of sizes, temperature and pressure ranges. Vanéflon – High Performance Plastics. High Performance Solutions. Virgin PTFE + stainless steel insert. Prime raw materials Self lubricating and inert to most chemicals Available in custom and standard DIN/ASA executions. Low permeability and water absorption Blow-out proof and conform to TA-Luft VDI-2200 and 2400. Pressure resistant up to 100 bar Temperature range: -200°C / +250°C PTFE | TFM® | PFA | PCTFE | FEP | ETFE PEEK | PPS | PI (Vespel®) | PEI |

Easy to mount. To achieve optimum efficiency and maximum service life, note the following recommended tightening torques (Nm) on flange fixing screws : Benefit from our stainless steel-lined gaskets:        Excellent sealing over a wide range of pressures with a max of 100 bar. Compression is concentrated on the ridges enabling tight sealing under very low compression Temperature range: -200°C / +250°C Low permeability & water absorption self-lubricating Extra features on request (colour, name stamp, ...) On-Stock range in DIN and

Standard DIN/ASA executions DIN2690 - ØD

Vanéflon Industrieterrein Zwaarveld 12 9220 Hamme, België Tel.: +32 (0)52 47 63 99 info@vaneflon.be www.vaneflon.be Steel lined gaskets PTFE stainless steel lined gaskets consist of a perforated stainless steel insert uniformly enclosed by PTFE. The synergy between the highly corrosion resistant PTFE mantle and the perfectly centred rigid stainless steel insert give the gasket exceptional chemical and mechanical properties preventing cold-flow in a wide pressure-temperature range. In extreme applications they are highly recommended for use instead of normal PTFE envelope-gaskets. All trade...