ABRASION & PILLING TESTER For the control of abrasion and pilling on almost any kind of woven and knitted fabrics, non-wovens, socks, gloves, natural and artificial leather, both dry and wet samples. Extremely versatile, robust, accurate, silent, vibration free, 100% made in Italy. Supplied with a basic starter kit of top quality consumables complete with traceable certificate. ISO 17025 Calibration Certificate (Accredia - ILAC) available on demand.

Code 2568 (9 positions) - Code 2568A (6 positions) Compulsory Accessories for 6- & 9-position setting Optional Accessories (at least 1 is needed) (available on demand) Set of 6 or 9 sample holders Ø 38 mm to perform ABRASION test according to UNI EN ISO 12947-1, and to perform PILLING test according to ASTM D4970, Code 2568A.900, or Code 2568.900. Set of 6 or 9 sample holders Ø 90 mm to perform PILLING test according to UNI EN ISO 12945-2, Code 2568A.300, or Code 2568.300. Sample holder for socks & hosiery ABRASION test according to UNI EN 13770, Code 2568.804. Sample holder for ABRASION test...

Testing procedure In conformity with the International Standards, the fabric specimen to be tested is brought into contact and rubbed against a Standard reference fabric (as regards abrasion test), or against the same type of specimen, or against a standard felt (as regards Pilling test), following a predetermined number of specific rotary motions known as "Lissajous figure” paths. Basically, the abrasion test end point is reached once the operator visually detects the first two broken threads on the tested fabric specimen, whereas the Pilling test is accomplished by observing (after e certain...

AVAILABLE MODELS COMMON SAMPLE CUTTERS FOR 6 & 9 POSITIONS - OPTIONALMartindale 6 positions Code 2568A Martindale 9 positions Code 2568 COMPULSORY ACCESSORIES FOR 6-POSITION SETTING (at least one is needed)Sample cutter to obtain 0 140 mm discs for PILLING test Code 2560.320 Sample cutter to obtain 0 38 mm discs for ABRASION & PILLING test Code 2560.322 Sample cutter to obtain 0 90 mm discs for PILLING test, if pre-cut discs are not available Code 2560.324 Set of 6 sample holders 0 38 mm for ABRASION test according to UNI EN ISO 12947-1 and PILLING test according to ASTM D4970 Code 2568A.900...