AUTOMATIC DYEING MACHINE - STATIC TYPE Ideal for small samples of yarn cones, bulk fibers, fabric beams and yarn skeins. Different configurations of automation levels are available to increase dyeing REPEATABILITY to reach the highest possible Right First Time (RFT). Technical features: • 3 VERSIONS available: MANUAL - STANDARD automation - FULL automation • from 1 to 6 INDEPENDENT UNITS with 1000 capacity • atmospheric and high temperature dyeing (max +135°C) • variable liquor ratio: from 1:30 down to 1:5 (depending on specimen type) • with programmable and user-friendly PLC microprocessor with touch screen display - up to 50 programs memory capacity • MADE IN ITALY with highest quality standards, safety features and low environment impact. • each DYEING UNIT is equipped with: • automatic continuous washing system and drain of the dyeing bath • reversible circulation pump (to allow bath flow from the inside-outside, and vice versa) • safety thermostat, as per CE norms • high quality thermal insulation system (to save power and enable faster temperature increase) • automatic indirect water cooling system by means of an electro valve

LODO HT Available standard configuration: LODO HT 1000 cc, 3 dyeing positions, code 323P6.332 LODO HT 1000 cc, 6 dyeing positions, code 323P6.338 LODO HT can be supplied upon special demand with 1, 2, 4 or 5 positions as well Optional accessories: For ALL versions: Different sample holders available on request, for: Bulk Fibers code 323P6.314, Yarn skeins code 323P6.316, Yarn Cones code 323P6.318, Fabric on Beam code 323P6.320 For the MANUAL version: ·· Injector, code 323P6.302 - for manual dosing (one per each dyeing unit is required). ·· Dosing syringe, code 323P6.304 - for manual introduction...