AUTOMATIC DYEING MACHINE - DRUM TYPE Miniature Laboratory PILOT piece dyeing machine, replicates Bulk Dyeing and fills the void between regular IR Lab dyeing machine and bulk production machine. Main features: • fully automatic, from pre-treatment to washing off - Load unload principle (similar to bulk). • Dyes yarns and fabrics made of any dyeable fibres and their blends. • All parameters are fully programmable, including Auto Dosing. • About 50 selectable different dyeing programs, each with graphic display. • Basic model endowed with 3 automatic dosing tanks. To obtain a fully automatic version, 2 additional dosing pumps can be added to each dyeing unit. • Up to 6 dyeing positions, either H.T. (+135°C) or atmospheric (+98°C), or combined. • Controller version (with PLC controller) for independent management of each dyeing position. • Available with different volume capacity, from 300 cc to 6000 cc. • Liquor ratio from 1:7 up to 1:40 (depending on GSM of fabric to be dyed). • Continuous programmable Reduction clearance possible (for PES and its blends), allowing continuous dyeing of PES Blends. • Excellent repeatability within one bath and reproducibility among baths - delta (<0,4 CMC 2:1) and RFT (> 95%). • Made in Italy out of best quality stainless steel.

Technical characteristics: Each dyeing position is equipped with a main dosing tank for primary filling and two tanks of 50 cc each for automatic programmed chemicals. Additional dosing pumps can be added as option up to 2 per position. The programmable functions enable the instrument to operate like a large scale machine with: • completely independent dyeing positions • automatic water filling and automatic dosing • automatic temperature control ± 0.2°C, Auto ramping, Auto hold • automatic dyeing bath drain • auto washing and neutralising Available Standard Configuration No. OF DYEING POSITIONS...