PNEUMATIC BURSTING STRENGTH TESTER Pneumatic bursting strength tester to determine the bursting resistance and the dynamic fatigue of woven and knitted fabrics as well as technical textiles, non-wovens, leather (artificial and natural), and of other non-textile applications (like paper, plastic, packagings, medical, etc.). The instrument is characterised by its refined design and guarantees an absolute reliability from both functional and security point of view thanks to its special “Perspex” bell-shells. BURSTMATIC 2 measures the required pressure necessary to burst or tear a specimen, as well as the specimen distension “height” prior to bursting. The sample distension “height” is measured by means of laser technology. Equipped with: ·· pressure rate auto-check system (no need for calibration foils); ·· extension height verification system (the use of Johansson gauge blocks is suggested); ·· a dedicated air inlet for pressure gauge connection (when calibrat

Description “Stand-alone” unit, equipped with wide touchscreen colour display and software. Endowed with high data storage capability (PC not required). BURSTMATIC 2 automatically generates test reports with results and graphs in PDF format, in the selected language. Test reports can also be easily downloaded on a flash memory or through an FTP connection. All test parameters, statistic results and graphs, as well as the real-time dynamic behaviour of the tested fabric during bursting or cycle tests, are displayed on the touchscreen. Compared to the previous version, this new screen is capacitive...