Hand-held tachometer for contact measurement and non-contact measurement of revolution of engines or shafts as well as surface speed and length e.g. belts and conveyer belts. High-quality hand-held instrument with easy to read LED display for professional use. Tachometer with 9 selectable measuring units. Universal model for contact and non-contact measurement. Hand-held tachometer for contact and noncontact measurement of revolutions and contact measurement of revolutions, line speed and length with an adapter Non-contact measurement of revolutions, using a laser beam and reflective tape Contact measurement of revolutions, surface speed and length For exact measurements of revolutions per minute, total revolutions, length and velocity with different metric and english units • 9 User selectable measuring units (min-1; m/min; ft/min; yd/min; in/min; m; in; ft; yd). Unit select switch: Built in selector switch permits the user to display readings in a wide variety of measuring units. • Tachometer with large, red, easy to read LED display, recommended at adverse lighting conditions Photographs and descriptions of the present leaflet have to be considered as purely indicative and not binding. *Le immagini e le descrizioni del presente catalogo sono da ritenersi puramente indicative e non vincolanti.

• Hand-held tachometer with automatic and manual memory (MAX, MIN, last and 10 seperate readings) for recall in display • Rugged aluminium housing with fixing for tripod (1/4-20 UNC thread) • Optionally available: Inspection Certificate 3.1 according EN 10204 with calibration report • Good visible, harmless laser beam • Certificate of Compliance with the order 2.1 according EN 10204 is included Available models Standard accessories Rubber Tip For contact measurement of revolutions (min-1) For contact measurement of revolutions (min-1) Photographs and descriptions of the present leaflet have to...

ELECTRONIC TACHOMETER ** code 1810E_F ** Rubber Measuring Wheel 6 inch circumference for measuring line speeds Extension 75 mm long, Adapter with serrated lock washer (old version) For contact measurement Adapter without serrated lock washer (current version) for contact measurement Reflective Tapes 1 page (35 pieces), self-adhesive Optional accessories Grooved Wheel Measuring Wheel (6 inch circumference) with special groove for measuring yarn and wire speeds. Rubber Measuring Wheel With 12 inch circumference for measuring line speeds. Only for instruments which are delivered with 12 inch wheel....

Calibration certificate with calibration report is optional available. Calibration report, available as option, code 181.CC1 Tachometer with 2 batteries, carrying case, 1 adapter H, 2 rubber tips, 1 funnel, 1 measuring wheel with 6 inch circumference, 1 extension, 1 page reflective tapes (35 pieces), Certificate of Compliance with the order 2.1 according EN 10204 free of charge and operating instructions in german and english Technical Specifications *Photographs and descriptions of the present leaflet have to be considered as purely indicative and not binding. *Le immagini e le descrizioni del...

‘Photographs and descriptions of the present leaflet have to be considered as purely indicative and not binding. *Le immagini e le descrizioni del presente catalogo sono da ritenersi puramente indicative e non vincolanti.