ELECTROPNEUMATIC TRANSDUCER converts a current or voltage input signal to a linearly pro- portional pneumatic output pressure. This versatile instru- ment is designed for control applications that require a high degree of reliability and cost. Optional NEMA 4X installation. Typically, these units are used for applications that require the operation of valve actuators, pneumatic valve positioners, damper and louver actuators, final control elements, relays, air Industries that utilize the IP6000 include Petrochemical, HVAC, Energy Management, Textile, Paper. Paper Converting, Food and Drug Volume Booster •Compact Size •Field Reversible •Flexible Zero & Span Adjustments Process Inputs Split Ranging

ent versions. The lower range model is designed for standard process control applications which typically utilize a 3 to 15 psig output. The extended range unit provides up to 120 psig output for high- er pressure industrial pneumatic and process control system requirements. balance device in which a coil is sus- pended in the field of a magnet by a flexure. Current flowing through the coil generates axial movement of the coil and flexure. The flexure moves towards the nozzle and creates back pressure which acts as a pilot pressure to an inte- gral booster relay. Input signal increases (or decreases...

Standard Process Inputs le Zero & Span Adjustments Integral Volume Boos HIGH OUTPUT RANGE Min./Ma«. Supply Pressure Above maximum output above maximum output Supply Pressure Sensitivity Tormina! Based Linoarily Response Time Dependent on pressure range ■ typically less than 0 25 sec for 3-15 psig uniis Flow Rate Relief Capacity .06 SCfm (.07 m3Av) midrange typecal 07 scfm (14 m3Au) midrange typical Oil free clean dry a>r filtered to 40 micron Tomp. Rango (Oporating) Port Sizes

Mounting Holes (Shown with Bracket Screws Installed)