SPRING RETURN

SERRATED INSERT SHAFT CONNECTION 'P DEEP 'NOTE • KSERTS AVA»AaEHDOUBl£-DtSOSOU«IE«OR<X)NOW« KEYED OPTIONS SOLENOID VALVE CONNECTIONS TO NAMUR BOTTOM VIEW EXTERNAL TRAVEL STOP ARRANGEMENT Dimensions (Inch) * 045 size actuator pinion design permits pinion to be inserted from top or bottom of the actuator lo use all three bolt aretes (or mounting. Top mounting dmenstons PCD -165". Tapping 10-24 UNC x 0.32' DEEP Bottom mounting dimensions (refer to chart)

Torques (Lb-Inch) Double Acting Actuator Torque Data (Lb-Inch) Actual torques are in the range of ±5% of the above values. In between torque values to be interpolated. SE= Spring End Torque, SB= Spring Break Torque, PE= Pneumatic End Torque, PB= Pneumatic Break Torque

Two external travel slops permit Note : Travel stops are located on end caps on size 045 only. Top quality bearings and seals for low friction and high cycle life to ensure trouble free operation. Same bearings are used for both Modular pre-loaded spring cartridges with metal spring guides for use in both high and low temperature applications. 4. Extruded Aluminum Body Hard anodized extruded aluminum body with honed internal surface for strength. high cycle life, and low frictional 8. Dual Rack and Pinion Design Dual rack and pinion design offers double acting and fail safe operations in same...