V926H
5Pages

Catalog excerpts

ADCA TWO-WAY HYGIENIC CONTROL VALVES V926H DESCRIPTION The ADCAPure V926H is a series of single seated two-way hygienic control valves with angle connections. These valves are designed to regulate and accurately control flow of liquids and gases and are suitable for hygienic applications found in the pharmaceutical, cosmetic, fine chemical and food & beverage industries. The V926H can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks. MAIN FEATURES Completely manufactured from bar stock material. Body and bonnet are connected by a clamp connection, allowing fast and easy maintenance procedures. Cavity-free with no air trap locations. Metal to metal or soft sealing. Self-drainable design. STANDARD SURFACE FINISH Internal wetted parts: ≤ 0,51 µm Ra – SF1. External: ≤ 0,76 µm Ra – SF3. Other surface conditions see TIS.GIA – General information ADCAPure. Ultrasonic cleaning. OPTIONS: Soft valve sealing. Reduced bore trims. Steam barrier. Inline connections. Saturated steam, hot and superheated water. Process fluids, liquids, air and gases compatible with the construction. AVAILABLE MODELS: SIZES: CE MARKING – GROUP 2 (PED – European Directive) ASME BPE clamp ferrules or tube weld (ETO) ends. Others on request. Assembling and packaging in a clean room certified according to ISO 14644-1. The product is end capped and sealed with recyclable thermo-shrinkable plastic film, to avoid contamination. Horizontal installation. Vertical inlet and horizontal outlet. See IMI – Installation and maintenance instructions. VALSTEAM ADCA LIMITING CONDITIONS * Maximum allowable pressure Maximum operating pressure Maximum operating pressure (steam) Maximum operating temperature Maximum operating temperature (steam and water) ** Minimum operating temperature * Other limits on request. Maximum operating conditions may be limited by the valve end connections due to normative restrictions. ** With EPDM seals. We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

ADCA PLUG DESIGN PARABOLIC PARABOLIC (SOFT SEALING) Sealing: Metal to metal Characteristic: Equal percentage (EQP) or linear (PL) Flow direction: From below Rangeability: 50:1 (EQP) or 30:1 (PL) Leakage: Class IV, acc. to IEC 60534-4 Sealing: EPDM, PTFE or FPM Characteristic: Equal percentage (EQP) or linear (PL) Flow direction: From below Rangeability: 50:1 (EQP) or 30:1 (PL) Leakage: Class VI, acc. to IEC 60534-4 FLOW RATE COEFFICIENTS – PARABOLIC PL AND EQP PLUGS SIZE 1/2" 3/4" * Microflow is only available with linear characteristic and metal to metal sealing. For conversion Kvs = Cv...

Open the catalog to page 2

ADCA DIMENSIONS (mm) SIZE * When ordering without actuator specify the preferred dimension, if any. Remarks: Face to face dimensions are not standardized. Different dimensions available on request. DIMENSIONS – PA SERIES PNEUMATIC ACTUATORS (mm) DIMENSION WEIGHT (kg) 6,3 6,2 10,1 9,6 18,7 14,3 24,4 / 28 * * For actuators with spring ranges 1 - 2 bar; 1,5 - 3 bar and 2 - 4 bar. For more information, please consult IS PA.100 and IS PA.140 – PA Linear pneumatic actuators. DIMENSIONS – EL SERIES ELECTRIC ACTUATORS (mm) DIMENSION For more information, please consult IS EL.012 – EL Linear...

Open the catalog to page 3

Optional steam barrier MATERIALS POS. Nº Valve body Compression fitting * Valve plug * Plug disc Discharge pipe * Valve plug seal Centering ring * Stem seal * Guide bushing * Scraper ring * Available spare parts; ** Others on request. Remarks: FDA / USP Class VI seals certificate on request. All valves have a serial number. In case of non-standard valves, this number must be supplied if spare parts are ordered. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 4

ADCA ORDERING CODES V926H a) Valve model V926H - AISI 316L / 1.4404 hygienic control valve, two-way, angle body Valve series Series 1 Bonnet design Standard With steam barrier Flow under the plug Stem and body sealing b) EPDM PTFE Metal to metal (class IV) Soft sealed with EPDM (class VI) Soft sealed with PTFE (class VI) Soft sealed with FPM/Viton (class VI) Linear (PL) Flow rate coefficient Kvs 4 See table below for other Kvs value codes Surface finish c) Standard surface finish Mirror mechanical polished external surfaces (SF1) Electropolished internal wetted parts (SF5) Pipe connection...

Open the catalog to page 5

V926H 5Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

V926H
5Pages