V16/2
7Pages

Catalog excerpts

ADCA TWO-WAY GLOBE CONTROL VALVES V16/2 (EN) DESCRIPTION The ADCATrol V16/2 is a series of single seated, two-way globe control valves designed for simple process engineering and industrial applications with non-critical operating conditions. These valves can be assembled with pneumatic, hydraulic or electric actuators, for modulating and shut-off control tasks. MAIN FEATURES Compact and cost-effective. Modular design to meet process requirements. Stem guided (up to DN 50) and post guided (from DN 65 to DN 100). Parabolic plug design. Stainless steel trim. OPTIONS AND ACCESSORIES: Bonnet extension for high and low temperatures. Various stem sealing options including bellows sealing. Soft or stellited valve sealing. Reduced bore trims. Silencers. Saturated and superheated steam. Hot and superheated water. Air, gases and others. AVAILABLE MODELS: V16/2G – SG iron. V16/2S – carbon steel. V16/2i – stainless steel. V16/2G – Flanged EN 1092-2 PN 16. V16/2S and V16/2i – Flanged EN 1092-1 PN 16 or PN 40. Standard PN 16 DN 65 flanges are supplied with 4 holes. 8 holes, according to EN 1092-1/-2, on request. CE MARKING – GROUP 2 (PED – European Directive) PN 16 BODY LIMITING CONDITIONS V16/2G ** FLANGED PN 16 FLANGED PN 16 FLANGED PN 40 FLANGED PN 16 FLANGED PN 40 ALLOW. RELATED ALLOW. RELATED ALLOW. RELATED ALLOW. RELATED ALLOW. RELATED PRESSURE TEMP. PRESSURE TEMP. PRESSURE TEMP. PRESSURE TEMP. PRESSURE TEMP. 16 bar -10 ºC / 50 ºC 16 bar -10 ºC / 50 ºC 40 bar -10 ºC / 50 ºC 16 bar -10 ºC / 50 ºC 40 bar -10 ºC / 50 ºC 14,7 bar 11,2 bar 350 ºC 10,2 bar 350 ºC 23,8 bar 400 ºC * Rating according to EN 1092-1:2018; ** Rating according to EN 1092-2:2007. VALSTEAM ADCA We reserve the right to change the design and material of this product without n

Open the catalog to page 1

ADCA BONNET DESIGN TRIM DESIGN UNBALANCED TRIM Above 250 ºC STEM SEALING BELLOWS * Up to 180 ºC in steam and hot water applications. ** Maximum operating pressure: 25 bar. PLUG DESIGN PARABOLIC PARABOLIC (SOFT SEALING) Sealing: PTFE/GR Characteristic: Equal percentage (EQP) or linear (PL) Flow direction: From below Rangeability: 50:1 (EQP) or 30:1 (PL) Leakage: Class VI, acc. to IEC 60534-4 Max. temp.: 200 ºC Sealing: Metal to metal Characteristic: Equal percentage (EQP) or linear (PL) Flow direction: From below Rangeability: 50:1 (EQP) or 30:1 (PL) Leakage: Class IV, acc. to IEC 60534-4...

Open the catalog to page 2

Valve with extended bonnet Valve with standard bonnet Bellows sealed valve Remarks: Standard PN 16 DN 65 flanges are supplied with 4 holes. 8 holes, according to EN 1092-1/-2, on request. WEIGHTS (kg) SIZE DN 15 MAX. PERMISSIBLE ACTUATING THRUSTS (kN) SIZE DN 15 VALSTEAM ADCA We reserve the right to change the design and material of this product without notice. IS V162E.015 E 03.2

Open the catalog to page 3

DIMENSIONS – PA SERIES PNEUMATIC ACTUATORS (mm) DIMENSION * For actuators with spring ranges 1 to 2 bar, 1,5 to 3 bar and 2 to 4 bar. For more information, please consult IS 3.70 and IS 3.70A – PA Linear pneumatic actuators. ØA A DIMENSIONS – EL SERIES ELECTRIC ACTUATORS (mm) DIMENSION For more information, please consult IS 3.72 – EL Linear electric actuators. A ØA DIMENSIONS – ELR SERIES ELECTRIC ACTUATORS (mm) DIMENSION * With PEL electronic positioner. For more information, please consult IS 3.73 – ELR Linear electric actuators fail safe. DIMENSIONS – AV SERIES ELECTRIC ACTUATORS (mm)...

Open the catalog to page 4

VALSTEAM ADCA We reserve the right to change the design and material of this product without notice. IS V162E.015 E 03.21

Open the catalog to page 5

* Valve plug Lower stem guide Stainless steel / Graphite * Scraper ring * Plain bearing Bronze / PTFE PTFE; Graphite filled PTFE * Stem guide Stainless steel filled PTFE O-ring guide Expanded graphite Packing spacer Graphite filled PTFE Bolts or studs and nuts (V16/2G and V16/2S) Bolts or studs and nuts (V16/2i) Compression fitting Stainless steel / Graphite Stainless steel / Graphite * Metal bellows Expanded graphite Packing spacer * Available spare parts. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice. IS V162E.015 E 03.21

Open the catalog to page 6

ADCA ORDERING CODES V16/2 a) Valve model Globe control valve, two-way, straight body Valve series Series 2 Body material GJS-400-15 / 0.7040 SG iron A351 CF8M / 1.4408 stainless steel Bonnet design Extended Trim design Unbalanced trim Flow direction Flow under the plug Flow over the plug Virgin PTFE V-Rings (V2.2) Stainless steel bellows with PTFE/GR safety packing (BV1) Stainless steel bellows with graphite safety packing (BG1) Parabolic Valve sealing Metal to metal (class IV) Soft sealed with PTFE/GR (class VI) L Flow rate coefficient FD Kvs 4 See table below for other Kvs value codes...

Open the catalog to page 7

V16/2 7Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

V16/2
7Pages