TSW22
1Pages

Catalog excerpts

ADCA THERMOSTATIC STEAM TRAPS AND AIR VENTS TSW22 DESCRIPTION The TSW22 all stainless steel thermostatic steam traps and air vents are specifically designed for use on process equipment such as kettle cookers, sterilizers, food, chemical and laundry equipment. Their small size makes them ideal for use with a wide variety of this equipment. MAIN FEATURES Modulating discharge. Discharges condensate close to steam temperature. Thermostats for different sub cooling (5 ºC to 30 ºC). Excellent air discharge. Operates on moderate superheated steam. Simple and compact design. Can operate in any plane. USE: Saturated steam. AVAILABLE MODELS: TSW22 – stainless steel wafer design. Sandwiched between flanges as per EN 1092-1 PN 40. In any position. See IMI – Installation instructions. RELATED TEMPERATURE BODY LIMITING CONDITIONS WAFER PN 40 ALLOWABLE PRESSURE * Thermostatic element Stainless steel * Strainer screen Centering ring * DN 20 is suitable for installation between flanges DN 15, removing the centering ring. PMO – Max. operating pressure: 22 bar. TMO – Max. operating temperature: 250 ºC. * Available spare parts. FLOW RATE CAPACITY (kg/h) MODEL Capacities shown refer to condensate at 10 ºC below saturated steam temperature (standard type S thermostat). Thermostats for 5 ºC (type H) and 30 ºC (type L) also available. Capacities for cold condensate discharge at 20 ºC are two to three times greater. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice. Produced in accordance with Sound Engineering Practices of the European PED - Pressure Equipment Directive.

Open the catalog to page 1

TSW22 1Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

TSW22
1Pages