SC32P
2Pages

Catalog excerpts

ADCA SAMPLE COOLERS SC32P and SC32PP DESCRIPTION The ADCAPure SC32P sample cooler consists in a helical-coil heat exchanger used to take samples quickly and safely from steam generators, clean or pure steam systems, WFI and other high purity mediums. Its spiral design saves significant space without compromise and a counter current flow path maximizes heat transfer and consequently cooling efficiency. The vertical sampling side ensures self drainability, as medium flows naturally by gravity to the sample outlet with no chance to remain inside. The device is available with integrated mounting brackets for fixed installation at the point of use or alternatively in a portable version (suffix PP) to carry along to any sampling point within the system. MAIN FEATURES Fully manufactured from corrosion-resistant 316L stainless steel. Compact and efficient. Self-drainable design eliminates possibility of sample retention. Integrated mounting bracket and alternative portable version. STANDARD SURFACE FINISH Internal wetted parts: ≤ 0,51 µm Ra – SF1. External : ≤ 0,76 µm Ra – SF3. Other surface conditions see TIS.GIA – General information ADCAPure. Ultrasonic cleaning. USE: AVAILABLE MODELS: SIZES AND CONNECTIONS: Steam, WFI and other liquids and condensable gases compatible with the construction. SC32P – fixed installation version. SC32PP – portable version. Cooling water inlet/outlet: 1/2" on body (ISO 228 or NPT) or 3/4" ASME BPE clamp ferrules. Sample tube inlet/outlet: 8 mm O/D or 1/2" ASME BPE clamp ferrules. Assembling and packaging in a clean room certified according to ISO 14644-1. The product is end capped and sealed with recyclable thermo-shrinkable plastic film, to avoid contamination. Vertical installation. See IMI – Installation and maintenance instructions. Cooling water must be at its maximum flow before opening or closing the sample inlet valve, in order to avoid scalding. Sample valve must also be closed before opening the cooling water valve. Sample coil should always be completely immersed in water. 30 to 60 kg/h of sample water at ≈ 30 ºC with 1 m³/h – 15 ºC inlet cooling water (boilers up to 20 bar – 220 ºC). For other pressures, temperatures and/or certified values, consult manufacturer. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

ADCA MATERIALS LIMITING CONDITIONS * Compression fittings ALLOW. PRESS. RELATED TEMP. RELATED TEMP. * ALLOW. PRESS. * Minimum operating temperature: -10 ºC. * Other limits on request. Maximum operating conditions may be limited by the equipment end connections due to normative restrictions. Discharge tube AISI 316L / 1.4404 * EN 10204 3.1 certificate and internal surface finish certification available if requested with the order. * Extended legs on request. ** Valid for units with threaded cooling water connections. Can be threaded ISO 228 or NPT. VALSTEAM ADCA We reserve the right to...

Open the catalog to page 2

SC32P 2Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

SC32P
2Pages