SAV10
3Pages

Catalog excerpts

ADCA SANITARY AIR VENT VALVES SAV10 DESCRIPTION The SAV10 sanitary air vent is a self-acting valve designed for air venting applications with liquids. The valve closes when filled with liquid product. As the level falls, the valve opens if pressure is also relieved. The valve does not open under operating pressure, thus being mostly used as a startup bleeding valve. Typical applications include air venting in CIP lines (e.g. installed at suction of SIP return pump to prevent air lock), tanks, high points in pipelines, amongst others. Specifically designed for hygienic systems found in the pharmaceutical, cosmetic, fine chemical and food & beverage processes. MAIN FEATURES Compact and easy to install. Springless design. Complete 316L stainless steel construction, including float. Different models available depending on the intended application. STANDARD SURFACE FINISH Internal wetted parts: ≤ 0,51 µm Ra – SF1. External: ≤ 0,76 µm Ra – SF3. Other surface conditions see TIS.GIA – General information ADCAPure. Ultrasonic cleaning. USE: AVAILABLE MODELS: Water and other liquids compatible with the construction. SAV10 – soft upper seat; metal lower seat. SAV10D – soft upper and lower seats. SAV10CK – soft upper seat; grooved lower seat. ASME BPE clamp ferrules. Others on request. Assembling and packaging in a clean room certified according to ISO 14644-1. The product is end capped and sealed with recyclable thermo-shrinkable plastic film, to avoid contamination. Vertical installation. See IMI – Installation instructions. CE MARKING – GROUP 2 (PED – European Directive) PN 10 LIMITING CONDITIONS * Maximum operating pressure Minimum closing pressure – silicone seals Minimum closing pressure – EPDM, FPM or FFKM seals Maximum operating temperature Minimum operating temperature -10 ºC * Other limits on request. Maximum operating conditions may be limited by the valve end connections due to normative restrictions. Min. liquid specific weight: 0,75 kg/dm³ VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

ADCA FLOW RATE CAPACITY (NL/min) MODEL SAV10 470 567 698 897 1086 1451 1812 2174 2536 2897 3259 3620 3982 Values shown refer to capacities of air discharge at 15 ºC, under average atmospheric pressure (1013 mbar). If the temperature of the air differs from 15 ºC, the discharge capacity can be corrected by multiplying it by: 288 , where T is the actual temperature in ºC. 273 + T It may be assumed that the temperature of the air is equal to the temperature of the liquid. OPERATION The SAV10 air vents are composed of a stainless steel valve body and cover and a free-moving stainless steel ball...

Open the catalog to page 2

** Silicone; EPDM; FPM; FFKM ** Silicone; EPDM; FPM; FFKM ** Glass microsphere filled PTFE Safety clamp * Available spare parts; ** Others on request. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 3

SAV10 3Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

SAV10
3Pages