S25/SS
3Pages

Catalog excerpts

ADCA HUMIDITY SEPARATORS S25/SS (PN 16 and PN 40) DESCRIPTION The S25 series centrifugal separators remove moisture from steam and compressed air pipelines. Steam and compressed air pass through the separator and, as a result of centrifugal forces, impacts and swirling effects, the particles with a heavier specific gravity, such as water and oil droplets, moisture in suspension, dirt and scale are separated from the fluid. The condensate collected at the bottom of the separator must be automatically drained by a suitable steam or compressed air trap. MAIN FEATURES Several possibilities of installation. No moving parts. Maintenance-free design. OPTIONS: Flanged condensate connection. Steam, compressed air and other gases. AVAILABLE MODELS: Flanged EN 1092-1 PN 16 or PN 40. Flanged ASME B16.5 Class 150 or 300 on request. Female threaded ISO 7 Rp or NPT on request. Always with the condensate discharge pointing downwards. See IMI – Installation and maintenance instructions. CE MARKING – GROUP 2 (PED – European Directive) LIMITING CONDITIONS FLANGED PN 16 * ALLOW. PRESS. RELATED TEMP. ALLOW. PRESS. RELATED TEMP. ALLOW. PRESS. RELATED TEMP. ALLOW. PRESS. RELATED TEMP. 16 bar 12 bar *** 250 ºC ̶ ̶ 25,2 bar 300 ºC 27,6 bar 300 ºC * Rating according to EN 1092-1:2018; ** According to EN 1759-1:2004; *** PMO – Maximum operating pressure for saturated steam. Minimum operating temperature: -10 ºC. Design code: AD-Merkblatt. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

EVH – Elbow vertical inlet / horizontal outlet APPROXIMATE DIMENSIONS (mm) * PN 16 * For certified values, consult manufacturer. Volume and weight refer to EN flanged versions. Other versions may have slightly different values. ** As standard, in separators manufactured with EN flanges, the drain connection is female threaded ISO 7 Rp. In models with ASME flanges, this connection is female threaded NPT. Alternatively, EN 1092-1 or ASME B16.5 flanged drain connection can be supplied (ASME in the same class as main connections). *** Standard PN 16 DN 65 flanges are supplied with 4 holes. 8...

Open the catalog to page 2

ADCA APPROXIMATE DIMENSIONS (mm) * PN 40 DN 300 946 610 1325 580 11/2" 1390 800 625 695 976 1404 597 691 489 735 * For certified values, consult manufacturer. Volume and weight refer to EN flanged versions. Other versions may have slightly different values. ** As standard, in separators manufactured with EN 1092-1 flanges, the drain connection is female threaded ISO 7 Rp. In models with ASME B16.5 flanges, this connection is female threaded NPT. Alternatively, EN 1092-1 or ASME B16.5 flanged drain connection can be supplied (ASME in the same class as main connections). *** Standard PN 16 DN...

Open the catalog to page 3

S25/SS 3Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

S25/SS
3Pages