S16S
2Pages

Catalog excerpts

ADCA HUMIDITY SEPARATORS S16S PN 16 and PN 40 DESCRIPTION The S16 series centrifugal separators remove moisture from steam and compressed air pipelines. Steam and compressed air pass through the separator and, as a result of centrifugal forces, impacts and swirling effects, the particles with a heavier specific gravity, such as water and oil droplets, moisture in suspension, dirt and scale are separated from the fluid. The condensate collected at the bottom of the separator must be automatically drained by a suitable steam or compressed air trap. MAIN FEATURES Several possibilities of installation. No moving parts. Maintenance-free design. OPTIONS: Flanged condensate connection. Steam, compressed air and other gases. AVAILABLE MODELS: Always with the condensate discharge pointing downwards. See IMI – Installation and maintenance instructions. CE MARKING – GROUP 2 (PED – European Directive) PN 16 BODY LIMITING CONDITIONS * PN 16 ALLOWABLE PRESSURE ALLOWABLE PRESSURE RELATED TEMPERATURE * Rating according to EN 1092-1:2018. ** PMO – Max. operating pressure for saturated steam. Minimum operating temperature: -10 ºC. Design code: AD-Merkblatt. VALSTEAM ADCA We reserve the right to change the design and material of this product without notic

Open the catalog to page 1

* As standard, in separators manufactured with ISO 7 Rp threads, the drain connection is also female threaded ISO 7 Rp. In versions with NPT threads, this connection is also female threaded NPT. Alternatively, EN 1092-1 or ASME B16.5 flanged drain connection can be supplied (ASME in the same class as main connections). Remarks: The top of the separator is supplied with a threaded connection which size does not exceed the size of the drain connection. This connection is always supplied with a threaded socket. It can be used for air venting or sensing pipe connection. MATERIALS DESIGNATION...

Open the catalog to page 2