S11
2Pages

Catalog excerpts

ADCA HUMIDITY SEPARATORS S11 (Centrifugal design) DESCRIPTION When wet steam is used in sterilization, moisture in suspension reduces the heat transfer efficiency, and the validity of the sterilization process can be compromised. The ADCAPure S11 series centrifugal separators remove moisture from steam pipelines. Steam passes through the separator and, as a result of centrifugal forces, impact and swirling effects, the particles with a heavier specific gravity are separated, such as water droplets and moisture in suspension. The condensate collected at the bottom of the separator must be automatically drained by a suitable steam trap. MAIN FEATURES 316L stainless steel construction. No moving parts. Self drainable design. Clamped construction to ease access for cleaning operations. STANDARD SURFACE FINISH Internal wetted parts: ≤ 0,51 µm Ra – SF1. External: Satin bead blast finish – 1,6 µm Ra. Other surface conditions see TIS.GIA – General information ADCAPure. OPTIONS: Vent connection. Special connections and dimensions. Steam, compressed air and other gases. AVAILABLE MODELS: S11 – horizontal connections. S11A – S11 with air vent connection. ASME BPE clamp ferrules. Others on request. CE MARKING – GROUP 2 (PED – European Directive) Assembling and packaging in a clean room certified according to ISO 14644-1. The product is end capped and sealed with recyclable thermo-shrinkable plastic film, to avoid contamination. Always with the condensate discharge pointing downwards. See IMI – Installation and maintenance instructions. VALSTEAM ADCA LIMITING CONDITIONS * ALLOWABLE PRESSURE RELATED TEMPERATURE * Other limits on request. Maximum operating conditions may be limited by the equipment end connections due to normative restrictions. ** PMO – Max. operating pressure for saturated steam. Minimum operating temperature: -10 ºC. Design code: AD-Merkblatt. We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

** PTFE/FPM Envelope * Available spare parts. ** Others on request. EN 10204 3.1 certificate available if requested along with the order. Remarks: FDA / USP Class VI seals certificate on request. All separators have a serial number. In case of non-standard separators, this number must be supplied if spare parts are ordered. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 2

S11 2Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

S11
2Pages