PV15 (ASME)
6Pages

Catalog excerpts

ADCA PNEUMATIC ON/OFF GLOBE VALVES PV15 (ASME) DESCRIPTION The ADCATrol PV15 is a series of single seated, two-way pneumatic on/off globe valves with diaphragm actuator. These valves are suitable for use with the most common process fluids such as steam, water, superheated water, air, neutral gases and oils. MAIN FEATURES Easy to service. Compact and cost-effective. Class VI shut-off with PTFE/GR soft sealing up to 200 ºC. Stem guided (up to 2") and post guided (from 21/2" to 4"). Compact actuators with rolling diaphragm. High spring thrusts and stroking speeds. Yoke and stem coupling with mounting according to NAMUR (DIN IEC 60534-6-1). Ambient temperature from -10 ºC to 80 ºC. OPTIONS AND ACCESSORIES: Top mounted handwheel. Filter regulators, solenoid valves and limit switches. Saturated steam. Hot and superheated water. Air, gases and others. PV15S – carbon steel. Flanged ASME B16.5 Class 150 or 300. CE MARKING – GROUP 2 (PED – European Directive) Class 150 VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

ADCA BODY LIMITING CONDITIONS * CLASS 150 ALLOWABLE PRESSURE RELATED TEMPERATURE ALLOWABLE PRESSURE RELATED TEMPERATURE STEM SEALING PLUG DESIGN PARABOLIC (SOFT SEALING) Sealing: Characteristic: Flow direction: Leakage: Max. temp.: PTFE/GR Quick-opening (On/Off) From below Class VI, acc. to IEC 60534-4 200 ºC FLOW RATE COEFFICIENTS (m³/h) SIZES 1/2" PV15 – PA SERIES ACTUATORS – FTO, UNBALANCED TRIM, SOFT SEALING (CLASS VI) MAX. PERMISSIBLE PRESSURE DROP (bar) VALVE SIZE ACTUATOR MODEL AIR TO OPEN (stem extends by spring force) AIR TO CLOSE (stem retracts by spring force) AIR SUPPLY PRESSURE...

Open the catalog to page 2

ADCA ACCESSORIES AIR FILTER REGULATOR AND SOLENOID VALVE INDUCTIVE LIMIT SWITCH BOX MECHANICAL LIMIT SWITCHES * For more information, including top mounted handwheel dimensions, please consult IS 3.70 – PA linear pneumatic actuators. VALSTEAM ADCA We reserve the right to change the design and material of

Open the catalog to page 3

* For more information, including top mounted handwheel dimensions, please consult IS 3.70 – PA linear pneumatic actuators. Valve body * Valve plug AISI 316L / 1.4404; Graphite filled PTFE * Post stem Stem guide Stainless steel / Graphite * Available spare parts. VALSTEAM ADCA We reserve the right to change the design and material of this

Open the catalog to page 4

* Scraper ring * Plain bearing Bronze / PTFE PTFE; Graphite filled PTFE * Stem guide Stainless steel filled PTFE Bolts (steel) Zinc plated steel Bolts (stainless steel) Lower actuator flange Yoke columns Upper actuator flange Zinc plated steel Crimp clamps Zinc plated steel Upper actuator cover (steel) Upper actuator cover (stainless steel) Lower actuator cover (steel) Lower actuator cover (stainless steel) Bolts (steel) Zinc plated steel Bolts (stainless steel) Washer (steel) Zinc plated steel Washer (stainless steel) Nuts (steel) Zinc plated steel Nuts (stainless steel) Spring steel...

Open the catalog to page 5

ADCA ORDERING CODES PV15 Valve model Pneumatic on/off globe valve, two-way, straight body Valve series Series 1 Body material A216 WCB / 1.0619 carbon steel Flow direction Flow under the plug Stem sealing PTFE/GR V-Rings (V1.2) Valve sealing Soft sealed with PTFE/GR (class VI) Actuator model PA10 (100 cm²) Mild steel construction (standard) Stainless steel construction Actuator direction of action Air to open (stem extends by spring force) Air to close (stem retracts by spring force) Flanged ASME B16.5 Class 150 Flanged ASME B16.5 Class 300 Size 1/2" ... Special valves / Extras Full...

Open the catalog to page 6

PV15 (ASME) 6Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

PV15 (ASME)
6Pages