PS130
6Pages

Catalog excerpts

ADCA SANITARY PRESSURE SUSTAINING VALVES PS130 DESCRIPTION The ADCAPure PS130 is a series of direct acting, diaphragm sensing pressure sustaining valves. These regulators, available with spring or dome-loading, are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve design. Specifically designed for the high purity gas systems found in the pharmaceutical, cosmetic, fine chemical and food & beverage processes. MAIN FEATURES Compact design. Non-rising adjustment knob. FDA / USP Class VI compliant seals. Completely machined from 316L stainless steel bar stock, no castings or forgings are used. STANDARD SURFACE FINISH Internal wetted parts: ≤ 0,51 µm Ra – SF1. External: ≤ 0,76 µm Ra – SF3. Other surface conditions see TIS.GIA – General information ADCAPure. Ultrasonic cleaning. OPTIONS: Leakage line connection. Panel mounting. Dome-loading. Top cap (adjustment screw with cover). Gauge connection on body. Wall mounting. Different soft sealings for liquids and gases. Degreased for oxygen application. Clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction. AVAILABLE MODELS: REGULATING RANGES: CE MARKING – GROUP 2 (PED – European Directive) ASME BPE, DIN and ISO clamp ferrules or tube weld (ETO) ends. Others on request. Assembling and packaging in a clean room certified according to ISO 14644-1. The product is end capped and sealed with recyclable thermo-shrinkable plastic film, to avoid contamination. Horizontal installation is recommended. See IMI – Installation and maintenance instructions. VALSTEAM ADCA LIMITING CONDITIONS * Maximum allowable pressure Maximum upstream pressure Minimum upstream pressure Maximum operating temperature * Other limits on request. Maximum operating conditions may be limited by the valve end connections due to normative restrictions. We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

ADCA FLOW RATE COEFFICIENTS (m³/h) * SIZE Kvs OPTIONS LEAKAGE LINE CONNECTION PANEL MOUNTING GAUGE CONNECTION WALL MOUNTING VALSTEAM ADCA Optional dome-loading We reserve the right to change the design and material of this product without notice.

Open the catalog to page 2

Optional panel mounting 60 Optional gauge connection Optional wall mounting Optional leakage line connection DIMENSIONS – ASME BPE (mm) SIZE * Valves with nylon adjustment knob weigh 0,3 kg less. DIMENSIONS – DIN (mm) WGT. (kg) 2,9 DN 25 120 32 125 156 62 80 25 15,75 1/4" 1/4" 1/8" 72,5 * Valves with nylon adjustment knob weigh 0,3 kg less. Remarks: Clamp ferrules according to DIN 32676-A. Tube weld (ETO) according to DIN 11866-A (DIN 11850-2). DIMENSIONS – ISO (mm) DN 20 120 32 125 156 62 80 25 15,75 1/4" 1/4" 1/8" 72,5 * Valves with nylon adjustment knob weigh 0,3 kg less. Remarks: Clamp...

Open the catalog to page 3

ADCA MATERIALS Optional wall mounting Optional leakage line connection Optional panel mounting VALSTEAM ADCA Optional dome-loading We reserve the right to change the design and material of this product without notice.

Open the catalog to page 4

Valve body Bottom cover * Valve seal * Lower diaphragm PTFE (Gylon) * Upper diaphragm * Adjustment spring Spring plate Adjustment screw Adjustment knob Corrosion resistant steel Shaft ring Stainless steel Leakage line ring Spring guide Adjustment screw Support plate * Available spare parts. ** Others on request. Remarks: FDA / USP Class VI seals certificate on request. All valves have a serial number. In case of non-standard valves, this number must be supplied if spare parts are ordered. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 5

ADCA ORDERING CODES PS130 Valve model PS13 1 3 T M X I X X X DI 15 E PS130 – AISI 316L / 1.4404 diaphragm sensing pressure sustaining valve PS13 Regulating range 0,2 to 1,5 bar 1 0,3 to 3 bar 2 2 to 8 bar 3 0,2 to 8 bar (dome-loading) a) A Flow rate coefficient Kvs 1,7 3 Kvs 3 (not applicable to sizes 1/2" ASME BPE, DIN DN 10 and ISO DN 08) 6 Diaphragm PTFE (Gylon) T EPDM (non-standard) E Valve sealing Metal to metal (non-standard) M EPDM E PTFE T FPM / Viton (USP Class VI on request) V Leakage line connection Without leakage line connection b) X Leakage line connection – ISO 228 G 1/8" N...

Open the catalog to page 6

PS130 6Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

PS130
6Pages