P20P
4Pages

Catalog excerpts

ADCA PISTON SENSING PRESSURE REDUCING VALVES P20P DESCRIPTION The ADCA P20P is a series of direct acting, spring loaded, piston sensing pressure reducing valves. These regulators are designed for use with nitrogen, compressed air, water and other gases and liquids compatible with the materials of construction. They are suitable for general purpose pressure reducing applications such as instrumentation systems and industrial equipment where small loads and high pressures are involved. MAIN FEATURES Compact design. Machined from bar stock materials. Non-rising adjustment knob. Ultrasonically cleaned and degreased. OPTIONS: Gauge connection on body. Diﬀerent soft valves for liquids and gases. Top cap (adjustment screw with cover). Degreased for oxygen application. Leakage line connection. Panel mounting. Bottom mounting. Self relieving. Compressed air, water and other gases and liquids compatible with the construction. AVAILABLE MODELS: P20P – stainless steel, piston sensing, low flow. In any position. See IMI – Installation instructions. LIMITING CONDITIONS CE MARKING – GROUP 2 (PED – European Directive) PN 320 Valve model FLOW RATE COEFFICIENTS (m³/h) SIZE Kvs VALSTEAM ADCA Body design conditions Maximum upstream pressure Maximum downstream pressure Minimum downstream pressure Maximum design temperature Maximum recommended reducing ratio We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

ADCA OPTIONS PRESSURE GAUGE CONN. LEAKAGE LINE CONNECTION PANEL MOUNTING Optional leakage line (d) and pressure gauge (d1) connections Panel mounting Optional bottom mounting connection DIMENSIONS (mm) Remarks: As standard, in versions manufactured with ISO threads, connections d1 and d2 are female threaded ISO 228. In versions with NPT threads, these connections are female threaded NPT. VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 2

Optional leakage line connection Optional panel mounting version MATERIALS POS. Nº Valve body * Valve head * Valve spring Piston sleeve * Adjustment spring Spring guide Adjustment screw Adjustment knob Painted aluminium Panel mounting ring Corrosion resistant steel Shaft ring Stainless steel Adjustment screw Leakage line ring * Available spare parts. ** Others on request. Remarks: All valves have a serial number. In case of non-standard valves this number must be supplied if spare parts are ordered. VALSTEAM ADCA We reserve the right to change the design and material of this product without...

Open the catalog to page 3

ADCA ORDERING CODES P20P Valve model P20P – piston sensing pressure reducing valve Regulating range Nº1 – 0,2 to 1,5 bar Oxygen (degreased) FPM / Viton Maximum inlet pressure 220 bar Gauge port options Without gauge ports Gauge port on the left side (relative to the flow direction) Gauge port on the right side (relative to the flow direction) Gauge ports on both sides 2 Relieving and leakage line connection Relieving (only for non dangerous gases) Relieving with leakage line connection Panel mounting Without panel mounting ring With panel mounting ring Female threaded ISO 7 Rp...

Open the catalog to page 4

P20P 4Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

P20P
4Pages