P161
6Pages

Catalog excerpts

ADCA SANITARY PRESSURE REDUCING VALVES P161 DESCRIPTION The ADCAPure P161 is a series of angle design direct acting diaphragm sensing pressure reducing valves. These regulators, available with spring or dome-loading, are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the construction materials and valve design. MAIN FEATURES Spring or dome-loading. Non-rising adjustment knob. Compact design with clamped body. Available with low pressure diaphragm. FDA / USP Class VI compliant seals. Completely machined from bar stock material, no castings or forgings are used. STANDARD SURFACE FINISH Internal wetted parts: ≤ 0,51 µm Ra – SF1. External: ≤ 0,76 µm Ra – SF3. Other surface conditions see TIS.GIA – General information ADCAPure. Ultrasonic cleaning. OPTIONS: Leakage line connection. Dome-loading. Top cap (adjustment screw with cover). Gauge connection on body. Lock system, allows inline clean-in-place (CIP) and sterilization-in-place (SIP) operations. Different soft sealings for liquids and gases. Degreased for oxygen application. Clean steam, compressed air, water and other gases and liquids compatible with the construction. P161. CE MARKING – GROUP 2 (PED – European Directive) REGULATING RANGES: ASME BPE, DIN and ISO clamp ferrules or tube weld (ETO) ends. Others on request. Assembling and packaging in a clean room certified according to ISO 14644-1. The product is end capped and sealed with recyclable thermo-shrinkable plastic film, to avoid contamination. Horizontal installation. Vertical inlet and horizontal outlet. See IMI – Installation and maintenance instructions. VALSTEAM ADCA LIMITING CONDITIONS * Maximum allowable pressure Maximum upstream pressure Maximum downstream pressure Minimum downstream pressure ** Maximum operating temperature *** 180 ºC * Other limits on request. Maximum operating conditions may be limited by the valve end connections due to normative restrictions. ** For tight shut off, with adjustment spring relaxed, ensure a minimum downstream pressure of 0,2 bar. *** See "Ordering Codes" table for restrictions. We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

ADCA FLOW RATE COEFFICIENTS (m³/h) SIZE Kvs OPTIONS LEAKAGE LINE CONNECTION GAUGE CONNECTION LOCK SYSTEM Optional leakage line connection VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 2

Optional dome-loading Optional gauge connection DIMENSIONS – ASME BPE (mm) DIMENSIONS – DIN (mm) REGULATING RANGES 0,8 to 1,5 bar, 1 to 3 bar and 1,5 to 5 bar Remarks: Clamp ferrules according to DIN 32676-A. Tube weld (ETO) according to DIN 11866-A (DIN 11850-2). DIMENSIONS – ISO (mm) REGULATING RANGES 0,8 to 1,5 bar, 1 to 3 bar and 1,5 to 5 bar Remarks: Clamp ferrules according to DIN 32676-B. Tube weld (ETO) according to DIN 11866-B (ISO 1127). VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 3

ADCA MATERIALS Optional dome-loading VALSTEAM ADCA Optional lock system We reserve the right to change the design and material of this product without notice.

Open the catalog to page 4

Valve body Intermediate flange * Valve stem * Valve seal * Valve plug * Upper diaphragm * Lower diaphragm PTFE (Gylon) Lower diaphragm plate Upper diaphragm plate Stem guide Plain bearing Spring plate * Adjustment spring Adjustment knob Adjustment screw Corrosion resistant steel Shaft ring Stainless steel Spring guide Adjustment screw * Available spare parts. ** Others on request. Remarks: FDA / USP Class VI seals certificate on request. All valves have a serial number. In case of non-standard valves, this number must be supplied if spare parts are ordered. VALSTEAM ADCA We reserve the...

Open the catalog to page 5

ADCA ORDERING CODES P161 Valve model P16 1 3 1 T M I X X X DI 15 E P161 – AISI 316L / 1.4404 diaphragm sensing pressure reducing valve P16 Valve series Series 1 1 Regulating range 0,3 to 1,1 bar 3 0,8 to 1,5 bar 4 1 to 3 bar 5 1,5 to 5 bar 6 0,8 to 5 bar (dome-loading) a) A 0,3 to 1,1 bar (dome-loading) a) B Flow rate coefficient Kvs 1,3 (only applicable to ASME BPE 1/2" size) 1 Kvs 2,1 (applicable to sizes DIN DN 15 and ISO DN 15) 2 Kvs 3 (applicable to sizes ASME BPE 3/4" and DIN DN 20) 3 Kvs 4,2 (applicable to sizes ASME BPE 1", DIN DN 25 to DN 32 and ISO DN 20 to DN 25) 4 Kvs 7...

Open the catalog to page 6

P161 6Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

P161
6Pages