P160G
4Pages

Catalog excerpts

ADCA SANITARY PRESSURE REDUCING VALVES P160G DESCRIPTION The ADCAPure P160G is a series of angle design direct acting diaphragm sensing pressure reducing valves. These regulators are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the construction materials and valve design. MAIN FEATURES High capacities. Top cap (adjustment screw with cover). FDA / USP Class VI compliant seals. Completely machined from bar stock material, no castings or forgings are used. STANDARD SURFACE FINISH Internal wetted parts: ≤ 0,51 µm Ra – SF1. External: ≤ 0,76 µm Ra – SF3. Other surface conditions see TIS.GIA – General information ADCAPure. Ultrasonic cleaning. OPTIONS: Leakage line connection. Gauge connection on body. Lock system, allows inline clean-in-place (CIP) and sterilization-in-place (SIP) operations. Lifting lugs to ease installation. Different soft sealings for liquids and gases. Clean steam, compressed air, water and other gases and liquids compatible with the construction. AVAILABLE MODELS: REGULATING RANGES: CE MARKING – GROUP 2 (PED – European Directive) ASME BPE clamp ferrules. Others on request. Assembling and packaging in a clean room certified according to ISO 14644-1. The product is end capped and sealed with recyclable thermo-shrinkable plastic film, to avoid contamination. Horizontal installation. Vertical inlet and horizontal outlet. See IMI – Installation and maintenance instructions. VALSTEAM ADCA LIMITING CONDITIONS * Maximum allowable pressure Maximum upstream pressure Maximum downstream pressure Minimum downstream pressure ** Maximum operating temperature *** 180 ºC * Other limits on request. Maximum operating conditions may be limited by the valve end connections due to normative restrictions. ** For tight shut off, with adjustment spring relaxed, ensure a minimum downstream pressure of 0,2 bar. *** See "Ordering Codes" table for restrictions. We reserve the right to change the design and material of this product without notice.

Open the catalog to page 1

ADCA FLOW RATE COEFFICIENTS (m³/h) SIZE LEAKAGE LINE CONNECTION GAUGE CONNECTION LOCK SYSTEM LIFTING LUGS Optional leakage line connection Optional gauge connection VALSTEAM ADCA We reserve the right to change the design and material of this product without notice.

Open the catalog to page 2

Optional leakage line connection Valve body Spring plate Intermediate flange * Valve stem * Valve seal * Adjustment spring Zinc plated spring steel * Valve plug PTFE (Gylon) Stainless steel A2-70 Stainless steel A2-70 Lower diaphragm plate Adjustment screw Corrosion resistant steel Upper diaphragm plate Stem guide Plain bearing * Available spare parts. ** Others on request. Remarks: FDA / USP Class VI seals certificate on request. All valves have a serial number. In case of non-standard valves, this number must be supplied if spare parts are ordered. VALSTEAM ADCA We reserve the right to...

Open the catalog to page 3

ADCA ORDERING CODES P160G Valve model P160G – AISI 316L / 1.4404 diaphragm sensing pressure reducing valve Regulating range 1,5 to 4 bar Flow rate coefficient PTFE (Gylon) Valve sealing Metal to metal (non-standard) EPDM – Tmax 150 ºC (180 ºC with steam and hot water) FPM / Viton (FDA approval only) V Top cap and leakage line connection Top cap (adjustment screw with cover) Top cap (adjustment screw with cover) w/ ISO 228 G 1/4" leakage line connection Top cap (adjustment screw with cover) w/ 1/4" NPT leakage line connection Gauge connections Without gauge connections Tri-clamp gauge...

Open the catalog to page 4

P160G 4Pages

Catalog excerpts

All VALSTEAM ADCA Engineering S.A. catalogs and technical brochures

P160G
4Pages